开云体育

JohnMax, Yeah, we noticed this and tried a change (shown below, we Copy/pasted the 3-series logic and changed directive to 4-series). *Though it did not seem to make a difference with volume FB* , and

Hi Chris, It’s been a very long time since I looked at these AVRs, but I wrote my own module back in the 2010-2013 timeframe. At that point, the MVMAX response was not defined in the protocol docs

Does the S+ module within that you are using have a #IF_SERIES3 directive in it? I found a year ago that when compiling for a 4-Series processor that this directive gets ignored- in my module I have

It sounds to me like you have bitten off a big bite.? A TCP server is used when Crestron listens for a device to connect to it, where a TCP client, Crestron connects to another network device- in

I use the cool automation integration at my home. It’s local. But it has cloud control too if you want to use the cool automation app when offsite.

Thanks. One question.? Is the integration local or through a cloud API? I saw a diagram that showed google assistant, alexa, and ecobee integration through the cloud.? Nothing I've seen for Crestron

Hi Jay, Another Tick for Cool Automation revised module works great.

Thanks Tim

Intesis? Tim Greenbank Control Systems Engineer

Thanks.

Hi all, hoping someone familiar with 2N might be able to help em with this one. I'm struggling with sending commands from crestron to the 2N access units.? I've got no problems getting the 2N to talk

Cool automation....it just works

The last time I integrated with a sophisticated mini-split system was a Daikin mini-split system with around a dozen zones.? That was about 15 years ago.? At that point in time the integration with

Hi Daniel, I had this module tested before upoading, it worked fine for me. Did you read and follow the instructions regarding verbose mode, polling values before controlling etc? I need to check if

Common Folk…all our customers, don’t get/understand db’s and especially “0 db” being Reference level cause 0 means nada, zilch, etc. I would infer that -db must mean less than Zilch!

You probably already know the 0 dB reference is for THX.? If you have THX certified speakers and all, then setting the receiver to 0 dB should yield the SPLs that the movie producers intended.?

Not preferable??...Haha...

More info... 1. Using 0-98 vs. dB levels seems to have no effect on the volume control of the unit, or the feedback received. 2. Volume feedback seems to always get the following format:?

Hi, Does anyone here has a working module for extron dmp 128 plus? I have downloaded the module from @crestronfreak but some how ramping is not working properly. When I pulse the ramp down, volume

I've done jobs reusing the cresnet wire for POE with this stuff in case this helps: https://www.nvtphybridge.com/polrefamily/