开云体育

If a touchscreen is not required, you could go for the HR-310 which is much cheaper. And i?d also go for a used RMC3 as it was already suggested by somebody else. Cheers, Thorsten Von:

Thanks all for the quick responses. This is for older folks that would require a handheld remote over an ipad or any other flat surface interface. May just need to have them bite the bullet for a RMC4

Have a look at Home Assistant, I have programmed and setup bunch of AMX systems and more recentrly Crestron ones but now I'm over with these oldies that suffer too much of their history ! I have

I haven't read the entire Hubitat thread, but if the fans can be controlled by Hubitat, Jay Basen's Hubitat modules could probably be used to control them from Crestron.

I?m both a Crestron and Control4 and don?t find the Control4 significantly cheaper compared to Crestron. Programming of C4 is much simpler than SIMPL, it?s more configuring than programming and the

AFAIK any control system that can do IP and serial communications is going to be sold by a dealer. A used 3-series processor and an HR-150 would be a more budget friendly solution. Ryan Cunningham

So far, I am finding that it is requiring a dealer. I have programmed about every system out there but don't have access to software anymore. I have looked into Control4 and URC Total Control but

Control4 - it does require dealer software but for a quick home theater it’s pretty inexpensive. [email protected]> wrote:

Thanks for all the suggestions.

To begin, I have a Crestron System in my house, but I have a friend that I am installing a small theater, but he can't afford Crestron. Any suggestions for an alternative to Crestron due to budget,

Its for XIO Cloud. Seems to generate unneeded errors so if youre not using it turn it off (HYDROGENENABLE OFF)

Here is some more info about BAF changing the Haiku fans to the i6 protocol: https://github.com/home-assistant/core/issues/69370 mentioning, at least for now, a way to downgrade firmware

Oh no, that's a bit of a disaster. The end of that thread on the hubitat forum indicates the change to the BAF app did change the integration. I'm not finding much about how they are controlled now.

Hi All, client wants to be able to switch between several interfaces. Not themes, completly different GUIs with different logic. I think it's not good idea to have all these GUIs in one VTPro project

My latest article, "Shelly TRV is Smart Home Technology for Homes Heated with Radiators” is being published by the good folks at Residential Tech Today Magazine on their web site. Radiators have

I see a file for a Mag254 in file section. Does anyone know if this works for the MAG250 as well? ( I downloaded it to try but we won't be loading for weeks) Thank you

Hi Ian, Did you ever get the file? I am doing a few of these and wondered if you would share your file. Thank you, Jon

https://community.hubitat.com/t/haiku-fan-big-ass-fans-support/7556/8?page=3 Try sniffing the ios udp, i am curious what you will see wrote:

So i have a Haiku fan and am trying the 2.1 module in the database, not seeing anything coming in on the RX line of the UDP/IP? connection with 31415 as the port. this fan is using the BAF app and

what's the hydrogenenable ?