Re: Big Ass Fan integration
|
Here is some more info about BAF changing the Haiku fans to the i6 protocol:
mentioning, at least for now, .
also - , which might allow reverse engineering.
?(found from a link )
Oh no, that's a bit of a disaster. The end of that thread on the hubitat?forum indicates the change to the BAF?app did change the integration. I'm not finding much about how they are controlled now.
Try sniffing the ios udp, i am curious what you will see
On Tue, Apr 12, 2022 at 3:58 PM Doug Greenhalgh < Doug1369@...> wrote: So i have a Haiku fan and am trying the 2.1 module in the database, not seeing anything coming in on the RX line of the UDP/IP? connection with 31415 as the port. this fan is using the BAF app and the fan is on firmware 3.0 according to the app. commands going to the module seem fine, ie:?<20:f8:5e:63:8c:5c;LIGHT;AUTO;GET>? ? i have checked the mac address in the BAF app, it is correct, thinking maybe they did break something, if anyone has any ideas please let me know. I also seen reference to trying a TCP/IP symbol, i did that and get a 5 on the status which is connection broken remotely if that sheds any light. also on the module i have tried just putting a 1 on the enable line and also just driving it high after the program has booted correctly, didnt seem to matter.
|
