开云体育

ah yes that was my issue, I forgot all about the feedback required to make it stick, thanks.

Do you have the analog inputs and outputs tied together in SIMPL? ?IIRC that is required for it to operate correctly.

The " hue saturation" and "lightness slider" of the color picker widget both snap to zero after about a second of selecting a color. This makes it difficult to get an actual color, because the

*It maybe more secure and easier to connect via a vpn you setup in the UDM-Pro?*

A couple Follow-up points for others' edification. - The Yamaha modules that the above link references are the ones that I've used successfully for both RS232 and IP control. As mentioned the IP

Hi HTH, The module I'm using is this one: https://applicationmarket.crestron.com/yamaha-rx-a3010/ Chris just solved my problem, as you can see in my previous email. It was about me thinking that the

Hello Chris, First let me thank you for helping me. I'm still new this and documentation is really scarce. I followed your tip and... that was exactly what I was looking for!!!! I had 3 sockets

The reason for this is because of the silly decision to include half of the module on the application market download, and the other half of the module in the Crestron Database itself. Whenever there

I think I may know what your issue is!! The module you're using has external TCP/IP input/output connections - Are you using these, attaching them to a TCP Client in the Device Symbol section?? If so,

Hello ckangis, Seems like Rs232 connections are way more stable then IP connections. Those 3 I'm working on are connected via ethernet only, using 1 TCP/IP socket each on the ethernet slot of the AP3,

Hi All, I have *(2) TSW-760-W-S?and?(1) TSW-560-B-S* All new, open box - units just have been used for a little bench testing, but basically are clean and ready to go. All include the mounting

Daniel, I've been testing/refactoring my interface module for the RX-AxA series, which is ONLY IP controllable (IR of course) and I have not had any connectivity issues that you describe. I'm holding

Copying the module and related CLZ to local folder fixed this issue. Was hoping I could use the user module folders on this PC but it still does not work correctly. Would still like to know if others

Migrating to a new PC and cannot get the Cisco Room Devices 4.0 module to compile properly in my program. Opened the CiscoRoomDevicesWrapper v4.0 and cannot compile that module. Error: Statement

I am using Yamaha IP 3000 1.2. Also I opened the module in simpl to check for parameters about keep alive / connections and they are actually there. But I wasn't able to figure out a way to stabilize

I have an update about this: Removing \usr\alexaappdata files, re uploading the program, rebooting and re registering solved the problem. You still get a not connected message on echoadmin but if you

Hello, Im losing my mind here. We have 72 devices working in a alexa-creston integrated enviroment. During logic tests the devices suddenly stopped working. After a lot of chase-tail we found a room

Thanks everyone, Seems like you are right about this, probably something wrong in the keep alive /reconnect logic that cant be easily fixed. Em sex., 1 de abr. de 2022 às 03:31, Thorsten K?hler <

Hi Walter, Thanks for your comments. I wanted to ask if you are using the webex calls from the Crestron touch panel, trying to create a direct call to webex but I can't.

I agree with Steve, IR is pretty stable in general (especially via cable) and often totally sufficient, with RS232 next to the list. However, for Yamaha, i?m using the YNCA protocol and found that to