开云体育

Thorsten I wrote a detailed article on extension driver development for CH for Residential Tech Today.? You can find the article here:

What I’ve found with the new Apple TV’s is that there’s an option in the menu of the Apple TV to have the “TV” button on the remote take you to the Home Screen (which will have all the

Hi, since KNX-support for CH is available for some time now, i?m considering adding CH to my portfolio. I?ve programmed some custom drivers for IP based devices and am considering to do the same for

CP4 v2.7000.00031.01 As mentioned though, I moved the serial devices to a CP3 slave and it did the same thing...Pretty sure that it's an site-specific electrical anomaly...

Very interest re Auto Neg on the switch. ?Had that once with a Sony display. ? Its was the only way to get the device on the LAN. ? Sony RMA’d the screen and the new one was fine…..Whilst the

What firmware ver is currently on it? 2.5000, 2.6000 or 2.7000? Regards, Stu Typos from my iPhone

Has anyone found a way to launch Debugger with: *Signal Mode: Send All Signals* AND *Have none of the checkboxes checked by default?* The only way to have No signals checked on start seems to require

Thanks, Steve! Very interesting...This is the first time in decades I can remember having this kind of problem... The issue is definitely separate from the processor, here's add'l intel... To clarify

I had the same issue with a DMPS3-4K-150-C. When I turned on the system for the first time I had link lights on the ethernet port. After a while I lost the link lights. After talking with crestron,

You have to create a group of extensions that you want to page in the UCM6202. You cannot call this 'group' from one of the members forming it, so you might need to create multiple groups based on

Sounds like you have some type of latch up issue.? It is quite common for ICs to latch up if there is current flowing into the I/O pins where the input pins are driven by a higher voltage that the

To follow up on what Steve said: The company that laid you off may have simply had to do so because they can't afford to have you on the payroll full time. That doesn't mean that their Crestron work

Hi All, We're seeing an odd issue with a CP4 and its serial ports on one site, and just wanted to see if anyone else has seen this, or if its a site-related issue... When the CP4 gets hard booted

Title says it all. What are some of the best options out there for a wireless CCTV camera compatible Crestron Home? Thanks fellas.

Sorry, I don't have experience with that model. Good luck, Brian

Yes, the Grandstream UCM6202 is the SIP server.? I have two TSW560's that I'm using for testing.? They are registered to the server and can communicate but when I setup a Page/Intercom Group all I

I'm using console commands like Steve is, and I have a similar list of commands. I've added different authorization levels for Crestron and mobile devices to my standard initialization procedures as

Do you have a SIP server there? We integrated Grandstream phones with TSWx60 panels at an install a few years back, but we had a AVLinkPro SIP server on site. This made communication a breeze. Also,

Anyone have experience with the UCM6202 and TSWx60?? I have panels registered as extensions and can call panel to panel but when I dial an extension I've setup as 1-way paging I get a busy signal.

There's a open for work channel on the Discord server, worth posting in there. Also the Facebook group. There are lots of dealers/CSP firms on those that may be thinking of hiring...