开云体育

hi John, You can set up an interactive presentation such that playback of specific content is triggered when Brightsign received a UDP message from Crestron and when playback starts or completes, you

Thanks for the reply we do have that unit I get 10 v coming from the Crestron dimmer. However the heater only gets 70v max. Any thoughts on that> I also see they provide a contact closure from the

Does this also apply to the dish wally device? I have to control one of these for a client and I have never used the product. Does it have IP control? There is a CCD package on the Crestron IO site

My latest article, "How Sensibo Pure Manages Whole House Indoor Air Quality” is being published by the good folks at Residential Tech Today Magazine on their web site. The article is a hands on

Thanks Paul

I use Fiddler2 from Telerik to quickly figure out http headers and responses. I found it very useful when debugging SSL problems as well. Paul

So we have a brightsign script for audio playback.? It works great, but the down side is that you have to physically pull the SD card to load new audio files.? So I am playing with BS Author and

Usually, there's a minimum acceptable amount of header info that products require and finding that can be time consuming. ?The process of stripping something down to its barest essence is called

similar to the C2N-UNI8IO is the GLS-SIM, which has two 0-10 inputs on it which could go behind the rotary dimmer.

In my house I monitor my "dumb" washer and dryer. For the washer it has a light that comes on when it is done- I just use a photocell light sensor taped over that. And the dryer is gas fired so I use

Well that reassuring because none of us use crosspoints haha <rolleyes>. Been using them forever and this issue didnt always happen so as usual we have another bug being introduced with an update...

I have controlled one with an irUSB (from videostorm). It was a fair while back and from memory we had to side load the app. Personaly I prefer the IP option but I assume Flirc would also work.

Hi Javier, As Brian said, since Forbes & Lomax are Contact Closure devices you can use C2N-UNI8IO to get the CC from the Buttons. For the Rotary button, you will have to select the 0-10V model

Javier, I believe that the Forbes & Lomax devices are simple contact closure. So, the short answer would be yes, but this wouldn't include their rotary dimmers. Also, I would be sure to mention to the

Hello everyone I have a customer who wants to buy forbes & lomax keypads, he does not want to use crestron keypads. Is it possible to control that devices with crestron? Thank you so much for your

I just wanted to follow up that adding a little bit of extra header information to the http request solved the problem. Thanks again to everyone that responded with suggestions.

I ran into the same issue in the past, just add a new button to the old layout an give it a random join number, convert again, this time the joins should be also taken over to the converted project.

Follow-up... Well! It did convert the project, with small text, but the BIG THING is that it did not copy *ANY* Joins!!!? so it is, as Natalie pointed out, not actually compatible... Typical Digital

I just confirmed that the issue indeed is caused by the presence of a Crosspoint symbol, and this is probably why Dave H was not able to replicate the issue at first.

Well, it?s as always depending on the use-case and the environment. Most people try to get their dryer and washing machine out of way to avoid seeing and hearing them – this includes beepers