开云体育

Do you have Homekit on, on the Crestron processor? I think you need to do it from console on 3 series now and there is a switch on the web portal on the 4 series.

All of the sACN projects I've done have used a node with a non-multicast address in the standard class C, B, or A IP address ranges. While the traffic may be sent multicast, the node you're

Were you able to pair the processor with home app? Mine is stuck on loading when i add an acessory. The app cant seem to locate the crestron bridge. I have been trying to control Apple TV through Siri

This is the document i have been following. https://www.crestron.com/getmedia/b11b4145-c0ad-4b43-841b-e85bc0b4b486/mg_pg_pairing_3-series_control_system_apple_homekit_technology Is there some other

IMHO it’s totally unreliable. I spent ages trying to get it to work then it fails. TB don’t really have a clue, so the general consensus is IR then CEC (depending on the setup). Many forums on FB

I'll shout for Caleb and ControlWorks as well!!? Love to work with them!!!

I think its the Toolbox version that determines this. older versions required clicking a checkbox to enable multiple projects to be loaded, like Ryan said. The latest version (v3.09.3) and a few

Hi! I use the CP4 control port for NVX network. On the lan port there is a DMX unit i need to control with sACN. My problem is that the sACN traffic is going to the CP4 control port and not to the lan

I forget what instances it occurs (I checked my CP3 and I dont have it), but on the Web Pages and Mobility screen, there is a check box to allow more than one project.? If checked, uncheck that. --

Hi, this is probably a really simple thing, but I have never had to do it before. I need to load different iPad GUIs onto the processor for iPads to connect to, rather than storing projects locally on

It might also be worth contacting Crestron, that number may be the Crestron lighting project number...

Not one of mine, but that filename looks similar to ones I've had from Riordan Brothers, they seem to do a lot of lighting programming for Crestron, certainly in the New York area

I am looking for someone who may have written lighting programs for a client in 2013. One of the program files is?959349 GCC GLPAC 3 Room 159 EIS 12 v4.smw. Any assistance would be appreciated.

I'll give Caleb a shout out as well.? Their module is tip top.? We have run across a few issues on installs and I have reached out to him and he has been on top of it support wise and resolved any

What Drivers have you used with not good results? I’d like to think that our Pentair IntelliCenter for SIMPL, IntelliCenter for Crestron Home, IntelliTouch, Jandy RS, and Goldline drivers all work

I have seen some discussion about pool controls, but looking for the most reliable pool driver.? Why do pool apps work but we can't get a good driver? -- Matt Grisafe AV Programming Associates

Double check the documentation. There are a few documents to follow. The items that get paired via the Apple Home App are the Crestron processor, and the Apple TV’s. The remotes get recognized via

I also use the colour coded signals & have not really noticed much of a performance hit. I have had instances where connected signals still stay highlighted in colour. Usually simply selecting the

I’ve seen this happen with modules – a signal on an input to (generally bad) or output from (meh) a module may have another driving source (generally bad) or destination (meh) inside the module

One I see regularly is copy/paste say for instance a bunch of digitals to an SRL and Simpl will throw up an error stating could not complete due to incompatible signal types. I've actually had this