开云体育

Yes especially with large programs F9 has been getting slower the past couple of years. Probably another "feature" they added that slowed it down more.

Dear Team, Thanks for your immediate response and support, as per the manual they are more talking about the source switching not the profile/preset recalling option is not provided in the command

Kol, From my small experience with barix and analog Siedle Doorcom (10 years old), Rava SIP was working smoothly, however the audio quality wasn't that good in full duplex, perfect in half duplex.

Hi, Yes, I am running program in 2 slots, I have attached the "Data aboard" error which the system is throwing and the SPLUSTASKS and THREADPOOLINFO responses of the 2 slots. I am not able to find the

I have a config module that goes through and sets the following one time when the program is first loaded and then reboots the processor. "TELNET OFF" "ENABLEFEATURE CLOUDCLIENT OFF" "HYDROGENENABLE

That is definitely a possibility. -Mike

Yes, I suspect the initialize/restore healed some issues with flash card.? I purchase a high endurance 4GB flash from Mouser and plan to clone the SD card.? I suspect that all the hydrogen errors in

I believe it is a paid cloud service where you can access your Crestron processors remotely.? There was apparently a change on how that cloud service works and if you have a CP3 with older firmware,

It sounds like the flash card is corrupt and doing the initialize/restore is forcing the processor to mark sectors bad and rewrite the FAT table in different sectors. -Mike

So WTF does hydrogen do anyways? From: <[email protected]> on behalf of Steve Kuehn <steve@...> Reply-To: <[email protected]> Date: Tuesday, January 19, 2021 at 4:29 PM To:

Don't know if this will help you but I recently had a CP3 that would work find until there was a power failure for a few hours.? When the processor booted back up, not only was the IP table missing

I'd tend to agree with plareeeiybusse ( /g/crestron/profile/@plareeeiybusse ) I would have a chat with AV Link Pro about the install. It seems pretty large so there might be some

See Customer Care Bulletin sent out June 2015: https://support.crestron.com/app/answers/detail/a_id/5575

Thanks for that info. As far as I know there are about 20 touch panels and a Barix or two at the gate(s).? I am under the impression that at this count, the RAVA SIP functionality will work without

I'd recommend Avlinkpro.? They can build custom SIP servers for any situation.

I saw such a state on some panels at different systems. In all cases it was the SD-Card. First two panels we did a RMA but the last 2-3 panels I asked TB to send us the cards and changed them onsite.

Yep – been there, done that. Von: [email protected] <[email protected]> Im Auftrag von cnaclerio6 Gesendet: Dienstag, 19. Januar 2021 18:53 An: [email protected] Betreff: Re: [crestron] Sony

We've had it happen on a dozen different finished projects now, different processors and multiple times in our office test processors.? Even jobs that have been done for eight months and keep

Hi Lincoln. Nothing on wireshark. RMA then. Thank you!

You’ve already done the network and control settings for the player but just to make sure, there is a setting called “remote start” that needs to be turned on. ?It is at the very top of page 26