开云体育

Bump!? No one has been experiencing any new communication issues lately?? or has everyone given up on Sonos integration... TIA!

I thought that the default behavior was that the TBar hide until you swiped down rom the top, NO??

You should *Always* set the DNS addresses, IMO - Its a beef of mine with dealers setting things up, they always forget the DNS addresses. Without DNS you can't get much/anything from the internet,

Yes, that's what I'm experiencing.? I'll give your suggestions a try, I was thinking of just adding a delay to allow the AVR to catch up but your suggestions sound more elegant. Thanks, Jay

When uploading the MLX-3's through the gateway with the method I've been using, mine download the updated project the next time I press a button on the remote to wake it up - they don't download the

Thanks Geoff. I will give that a try tonight when I get home. I was just doing the project assignment on the Gateway itself like I did with the MLX-2 remotes then when I reboot them they downloaded

was doing some testing to remove the toolbar discovered that turning off all the buttons removed the toolbar from the screen deleted the extender, recompiled & reloaded - toolbar still missing -

John, I've got 2 MLX-3 remotes in my home system that I have been updating through my CEN-RFGW-EX gateway for years using the indirect option - Indirect checked and infiNET (EX) ID set to the ID of

Did anybody ever find an app jump url that works for screenlogic?

So I finished my remote upgrades for my house and got both MLX-2's working flawless on the older IC gateway with the rolled back firmware. I updated the firmware on the newer IC Gateway and Acquired

You need ethernet on older TPS panels to get cover art. It does not come over when using only Cresnet (you can see this by removing the ethernet and you will lose artwork). I would put DNS servers in

You could post the results of those console commands here and we could take a look. Also are you running multiple program slots? The data abort could be coming from another slot (I assumed you were

How about using the Play command- does that power it on? We've had to do that over the years for units without discrete power commands.

Thanks. I got the issue fixed. I compacted the flash memory which caused the whole panel to crap out however after initializing it back to defaults and reinstalling the program the coverart is working

1. I assume that you're using ethernet to connect/control the 6L 2. Check your DNS settings for the panel

Hi Jay R. If I'm understanding your issue - The Slider is sending Analog values to the AVR and the AVR feedback is re-seeding the Slider with the real-time value from it. With Crestron gear I also

Hopefully you are not exposing your CP3 ports to the Internet.? If you are, those error are likely being cause by someone overseas hammering your CP3 in an attempt to break in. If not and no network

In word, no. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Diamond) ControlWorks Consulting, LLC Direct:

I had to do an initialize of the panel back to factory defaults and then I was able to reload the program.

So I had a different issue with my TPS-6L where coverart wasn't showing. I tried compacting the internal flash memory it to reclaim some purgeable memory. After that was done and the device rebooted