开云体育

Bump Anyone hear anything new yet?

I just got a DM-PSU-8-PLUS and it cycles some very Louis fans every few minutes. I only have two Poe connections at the moment and it runs quiet than really loud then back to quiet. I am not worried

Sounds like it's expecting tenths of degrees and you need a ascale somewhere in your programming

You need to experiment with the flashers.? Some devices can be blinded by the output level of the flasher.? I would hold the flasher a few inches away from the front of the PVR and repeatedly hit

Many thanks to Peter Jablonicky for posting the "Sonos Line-in control" modules in the File section.? I would have never guess it would be possible to control a Sonos via SIMPL or SIMPL+.? Found it

Thanks all.? The Faradite unit looks really nice, size wise, and I also figured out’ there is a Crestron unit GLS-OICLCL-C-CN that for some reason I didn’t find the first time around but it is a

Thanks Lincoln From: <[email protected]> on behalf of Lincoln King-Cliby <lincoln@...> Reply-To: <[email protected]> Date: Friday, January 8, 2021 at 12:56 PM To: "[email protected]"

Thanks Nathan From: <[email protected]> on behalf of Nathan Durfee <nathan@...> Reply-To: <[email protected]> Date: Friday, January 8, 2021 at 9:42 AM To: <[email protected]> Subject: Re:

Reinstalling XPANEL did the trick, thx for the tip.

Hi, i just have seen your post. did you get around to make the Module for the p300? I have to control a p300 and would love to have a module to set the volume and get the correct fb analog value. Glad

Autonomic is probably your best choice. ?Easy to to integrate, fairly reliable, readily available.

Any word on this?

Thanks John Did some more trouble shooting this weekend and have PVR 1 working better but speed of channel surfing still not at same speed as PVR 2 when using ML 600. When I use ?PVR remote directly

*Easier solution* : - Add a space between your ' *%u* ' and the ending ' *}* ' MakeString(TempStr$, "{\"A%u\":%u }", Index, Value);? ? ? ? ? ? // First solution MakeString(TempStr$,

Guided access is the way to go, you just need to factor in onsite support when it goes wrong. ? If the ipad needs to be restarted or the App force closed / restarted and you don't want anyone having

The short answer is no - there is no current product that does what you're looking for.? Everything outside the car moved to streaming 5+ years ago.? You may find some old units that support RS232

Most Crestron equipment? (except for power amplifiers) today have switching power supplies where the neutral/line are completely isolated ? from ground and can tolerant quite a bit of voltage on the

The question is in regard to the voltage differential that can be measured between ground and neutral. It can be induced by certain types of loads. We have a power monitor from surgeX that we are

Neutral to mains ground? Earth ground should not be shorted to neutral anywhere outside the breaker box.? So, I don't know if the ground/neutral voltage difference is problematic.? On nearly all

Sirius SCH2P Home/Pro tuner. https://www.crutchfield.com/S-CGoraOvmSqE/p_220SCH2P/SiriusConnect-SCH2P-Home-Pro-Tuner.html About 12 years ago, I had problems with the Crestron host seizing up