开云体育

Great idea Brad... the only thing that I've seen so far is the Modulus M1 https://www.modulusmediasystems.com/ Jury is out as to whether it will make a real go of it, and if it will be able to flush

The following files have been uploaded to the Files area of the [email protected] group. * /Documents/Integration with LiftMaster MyQ Garage Door Opener.pdf (

I just posted a document in the files section from research I did recently on the MyQ product. I haven't actually integrated a unit yet so YMMV, but it looks quite promising. Of course I would

sorry, i can't agree that you point at the dll (this may have been an older method) i just tried Randy's hint - i used v1.9 and just loaded the path in the driver, i did not mention the pkg file

I have an AppleTV, Firestick and Roku. Basically all three do basically the same thing, streaming of Netflix, Hulu, Disney+, AppleTV+. Is there a server appliance or equivalent that can house all my

We've had an absolute nightmare with LG resi OLEDs over the past month or so..? LG confirmed a bug in some of the firmware on certain displays, the display wanted a different baud rate on the 232

Also, can you provide the node ID, and what model of the motor?

Sounds like you have this covered but just as an FYI for future reference, the latest Biamp modules (and all modules we - Control Concepts - have created) are available for direct download from our

Mark, You need to point the CCD symbol to the driver dll, not the pkg file. Take a look at this post, which includes screenshots of all the symbols needed to get the driver working:

Randy, yes pls send me your test pgm - markkaye at avfusion dot com so you don't name the pkg file, just the path? i use the full path & filename

I don't think VTPro-e ever did, I can remember that I always had to install it by hand. Before the dowoadeble installer existed I've used the one which you get when you compile a executeable XPanel.

XPanel installer did it, thank you dblpnt! Apparently VTProE doesn't install it automatically. And why tech support didn't think to suggest this.... g

I haven’t looked but based on the way it’s implemented in SIMPL (module with a serial to/from a generic Infinet device) I would be a little surprised if it exists in a way that doesn’t require

So just to confirm, is the RS485 port on the processor connected directly to the SDN port on Somfy or through a UAI plus? wrote:

Hi All, Anyone having any issues with Autonomic MMS e-series and Crestron Home? ?I just configured a MMS-3e and a Crestron Home system (both latest firmware) and while the Main and Player B channels

The CCD can be used and it was part of my troubleshooting when control failed. ?If they are aware of the problem and ‘working on it’ then they know that the V2 is similarly non functional.

Got a call from Dish Custom Integration team today. They advised they are working on the issue and suggested a couple of things: 1.) I was not aware there is a secret menu to assign a static IP on the

Nevermind - TB just called me back and let me know they are now sending a download link to me.? Thanks.

Under the circumstances I hope this is ok to post.? If not the moderator can remove this. I have just been on the phone with TB and confirmed that the Crestron Application Market is down. Modules can

I sort of hate to say it, but the SnapAV LUMA product line is pretty good, both in hardware and software/app, and the cameras are generally 'a snap' to get streaming on TSW panels... It seems to be