开云体育

Damn been using the gwexer so long thought it was a global command

Last install I did was around 8 months ago. I used the ir driver Telus UIw40001e this worked well. Previously ion an older box I used the cisco CI430 driver .However some commands had the same issues

Have you made sure they are the the Telus toggle or "Multi" codes? im not sure if they still use them on the new boxes but all of my previous installs have used them.

The very latest. It was just installed last Friday. Both the working ones are the 4K wireless but they're hard wired. It's just the new PVR

What model of boxes are you using ? I have had the same issues with a few .

SO I've got a client that has 3 Telus Optik 4K boxes, 2 portals and a PVR. All three use the exact same remote. The 2 portals work just fine,no issues, the PVR won't accept 2 of the same command so

Unfortunately the CEN-RFGW-EX does not have those commands

Thank you

SCAN will work also....

> > I've fed output from an NVR into an NVX system and it worked just fine. It > was an Axis camera system iirc so you should be ok. Honestly I would steer > clear of the RMC-100-STR as stream

Scanenergy all

Hey all, having a brain fart and can't remember the command to get the gateway to check the channels and show which is best?? TIA

Oh, I missed that, thanks. I just went back and read that email, and they have it buried - it's second from the bottom, in the NVX section :-) Although that's a nice addition, it's not nearly as

Would be great if Crestron made a DM-NVX-100-STR.

Sorry should have been a bit clearer. I don't mean decode the camera streams in NVX. I mean a network decoder with HDMI out that easily integrates into Crestron. Plan is to plug this into an E30. I

Per the latest commercial product announcement they are releasing firmware with a thumbnail preview stream of NVX encoded content for use with touch panels. It will be 1 frame per second and exclude

No, it's not new. By design, the NVX is a "closed" system, and only transmits or receives encrypted streams from other NVX units. However, several people have suggested adding the feature to allow

It seems like Nest is not shutting the door to third party integration, it is simply migrating and consolidating things. It's a pain, but understandable.

We tried to pump in H.264 cameras or streams into NvX and was told that you can't pump a H.264 direct to a NVX unit.Is this something new?Sent from my Verizon, Samsung Galaxy smartphone

Does anyone have any suggestions on getting Axis IP CCTV into an NVX system? I'm very keen on the DM-RMC-100-STR as it looks like it ticks all the right boxes but I've been asked to find other