开云体育

Thanks for the feedback guys! Have a great day.

Thanks for your feedback @marselle001 So a 2 series processor will do the job just fine then! (:

i did that didn't worked out previously , even i swapped sd card from anther working panel , the panel did not worked .these 52 has this as common problem , if you are expert in smd soldering and

one of the advantages of series 3 over series 2 if you want to make program just for lighting , and anther program for HVAC , anther program for shutter actuator and use the EIC between them? in

series 2 will work perfectly , what i want to say , knx remain knx , since telegram remain telegram , what you can do in series 2 along with knx you can do it in series 3 unless you want to use your

Title kind of says it all, does anyone have an IR file for this tuner?

CoolAutomation use to have the CoolMasterNet interfase, but also is no longer wirking. In the home page this is what shows: "NOTE: Google is in the process of migrating the "Works with Nest" program

Once again, thanks Neil! :-)

If Masters proved anything it's that Crestron's CH5 developers did not understand the level their audience are at. I spent some time working through CH5 and have managed to get a handle on it, not

It's no secret, Crestron said it openly. I agree that the learning curve with these new tools is massive but I also believe it is the right thing to do and it makes us better programmers. Also, SW and

This looks to me like they just don’t want to develop their own tools anymore...

I've only done one job with it, and that was 2 years ago. I haven't heard from that client since, so i'm under the assumption its still working. I'm doing a job now that has one shade controlled this

Hello everyone, At the end of the last year I did an integration between Crestron and Somfy with a UAI+ IP interfase, and in the very begining it was working fine, with a few issues, but I was the

Lincoln, I couldn't agree more. This is one of my biggest frustrations with Crestron, both from the standpoint of having worked in education in the past and because I didn't come into programming from

And this is precisely the biggest issue with Crestron’s approach on CH5 and S#. It’s not a technical problem but a philosophical one. The competitive set is talking their adopted languages (Lua,

Crestron knows that the HTML world is large and just like programming back ends, can be done many ways to achieve the same results. Crestron is making a simpler example program because they did

After watching the HTML5 Webinar last night from Crestron, the concept of using standard web development tools to generate our project is very appealing.? Possibly even using something like WordPress

I found that iPhones (and iPads) actually do a pretty nice job up-scaling from lower resolutions, so I do not miss a higher resolution app. However, I was wondering if there is a way to use the full

The sheer number of completely unrelated replies with suggestions in this thread is concerning. How about some real documentation and training, Crestron?

For iPhone you are still better off using the standard iPhone 5 resolution they have as a setting because the Crestron app for iOS does not support retina graphics.? I believe Apple has a requirement