开云体育

James, That Discord link didn't work for me. Is it possible for you to share a proper invite link?

A good idea trying a new power supply. I've been seeing a lot of Crestron power supplies failing lately. The thing that concerns me is the CP3 processor lost its mycrestron dynamic DNS settings too.?

One of the big complains I have about the media streamers today is the general lack of a video gui that you can display on a TV and control with a simple remote.? So when I saw the MMS-5a has the

Thanks Steve! I will take a look in a bit. I was in the process of typing this so figured I would still send it. Interesting about the IR. The MMS-1e and 5e have an IR receiver. And the MMS-5a has an

Your lucky day.? I have a version that uses VTPRO v4.4.? Here is the link: /g/crestron/files/Modules/Autonomic_MMS_Version_3.2.6.zip The version Lincoln has is probably the older

Finally a resi question I know the answer to :) At least with the MMS that I pulled off a junk pile to turn into the replacement PBX for my house -- there is definitely not a IR receiver on it. It's

I don't believe your can control the MMS-x with IR.? It don't believe there is even a IR receiver built in the unit plus if there was, there is no gui to interface with to select your music.? The

I use the autonomics server but don’t use the media object (not that much of a fan of the media object on any device ) Thankfully the module you get from snap AV has a lot of function but you can

Thanks for sending that. I've been reviewing the Simpl program and some of the programming may be a little too advanced for me. Unfortunately I can't get a VTPro File to see how a bunch of these

I would first try another power supply. IIRC there's a functionality in firmware that erases the program after X unsuccessful power ups and maybe the used one aged so that it needs time to stabilize

Hi Nathan, Thank you very much.? ?I was having a brain freeze.? ?Thank you for your help and the quick reply.? ?I was able to continue last night after reading this.

Here is the support page for the MMS-2A. https://www.snapav.com/shop/en/snapav/autonomic-mirage-media-server-w--2-audio-streams-au-mms-2a Go to the Support tab and you can download the protocol and an

I am having an issue with a CP3 losing its program if it loses power overnight.? Short power failures no problem.? But client unplugs the rack when there is lightning storm only to find the system

I was hoping somebody could help me. I have an old Crestron system that I self support. I use a CP2E and have a few TPS-6Ls and 4Ls throughout my home. My Crestron Database and Device Database are a

So since labs is shutting down I figured someone here might know how to make this work. I'm trying to use ch5 and I have a simple touchpanel and was going to try to use contract editor to make it so I

I had to delete the IP table and re-entry the IP table entries, then it would take it. Thank you for the alternating way.

Bryan, I've only done one Crestron Home system but I've had this happen and it was dye to DNS settings being messed up in either device. Log into console into both devices and type testdns

Hi, I am trying to get Crestron Home OS3 to recongize DIN-CENCN-2 devices.? ?I can see them in toolbox, and device discovery tool, but they are not recognized in Home OS3.? ?Has anyone encountered

I was doing some quarantine cleaning and found a TPS-6X and HPRFGW.? They were taken out of a seldom-used install and are in great shape.? Not sure of the condition of the batteries in the TPS, but

Nathan, There's a Discord channel for CH5 that might give assistance. https://discord.com/channels/314425881994985472/562746523499233284