Re: Autonomic MMS-2A vs. MMS-1e features and control question
|
Thanks for sending that.? I've been reviewing the Simpl program and some of the programming may be a little too advanced for me.? Unfortunately I can't get a VTPro File to see how a bunch of these signals flow through which is what I would probably need to replicate this into my system.? I did find a VTPro file for the Xpanel in the e-server group but I only have VTPro 5.3 and the oldest file they have was made in 5.4 so I don't think I can open it which is too bad.? I wish I had access to the IR file so I could at least get the device and control it with IR while playing around with the different modules.? Might still be worth an Ebay purchase to mess around with.
I don't supposed anybody has an old 5.3 or earlier VTP file for their demo program?? Thanks!
On Sun, May 24, 2020 at 10:44 AM Steve Kuehn < steve@...> wrote:
Here is the support page for the MMS-2A.
Go to the Support tab and you can download the protocol and an
example program.
You don't have to use Media Player Object.? Instead you have build
your own interface as shown in the example program (at least it used
to be that way).
The MMS-1e is pretty much the same as the MMS-2A except it is one
zone instead of two.? Same module controls both.? I've only used the
MMS-2A and the newer MMS-3E.? So I have no real world experience
with the MMS-1e.
Per the spec table, the MMS-2A supports Tidal.? The MMS-1e is a
newer model so it is more likely to support newer streaming
services.
Good luck,
Steve
On 5/24/20 9:26 AM, ktrdsl23 via
wrote:
I was hoping somebody could help me.?
I have an old Crestron system that I self
support.? I use a CP2E and have a few
TPS-6Ls and 4Ls throughout my home.? My
Crestron Database and Device Database are a few years old and
I can¡¯t update
them as I¡¯m not a certified developer.
I¡¯m looking to replace my internet radio
streamer to either
an Autonomic MMS-2A or MMS-1e which I would purchase on Ebay
which then would
feed into my two AAEs for home audio distribution.? I
don¡¯t believe I have access to the Media
Player Object that it sounds like most people use for the
Autonomic.?
I¡¯d be fine controlling with IR to select a
few favorites
(that¡¯s what I currently do with my Grace Internet Radio) and
then use either
the Autonomic app or web interface for more complete control.?
The issue is that only the MMS-5A comes with
a remote control and I can¡¯t seem to find the IR codes online
after doing a bit
of searching.
The streaming services I care most about
are TuneIn, Pandora
and Tidal.? The Grace only has Pandora
which is why I¡¯m looking to upgrade.? I
have a few questions:
1)?????
Does the MMS-2A support Tidal with
the latest
firmware and would I be able to update the firmware if I
bought one on
Ebay?? If it does are there any other
benefits to getting the MMS-1e over the 2A as the 2A seems to
be cheaper on
Ebay.
2)?????
Is there a publicly available
Crestron Control
Module or does anybody have an IR file that I could get to
control either
device?? I didn¡¯t see anything in the
files section of this group.
3)? Am I better off
considering something else such as BlueSound?
Thanks!
|
