开云体育

I worked on a project with a few of these a couple of years ago. I didn't perform any scientific testing, but there was definitely a difference between say 30%, 60%, and 100%. It wasn't very

You just need to create the GUi, and load to the codec. You can give your own name to each control, or use the default assigned when you create the control. In the program, use the cisco touch 10

Hi all, We have a house with 6 heaters and they say the range isn't really working, the heaters are really just on or off. I tried using like 10%, 20%, 30%, 40%,50%,60%, 70%, 80%, 90%, 100%. But I am

Does anyone had any idea?

Hi, Thanks for your reply, but do I need to do certain codeing in cicso VC or making the GUI using cisco end room controller is enough. Crestron@... wrote:

Dallas My on-site tech said the Spectrum tech told him this was the first time he had seen these boxes, so they seem to be hot off the press.

Have one of these on a job but it was added later and no way of getting tn4 bus wire to the existing 482 gateway that has the radiant tstats. So we have no way of talking to the snow melt zone. But

Hi everyone! Good day! Is there anyone that has an IR code already for SAMSUNG TV QA Series? If yes, would you able to share it here? Thank you in advance and have a good day! - Kevin

We built a few systems with the Touch 10, SX80 and an RMC3 processor, also used an external switcher driving the presentation input. Main issues we had - make sure you create the custom UI in the same

I have not seen a module for snowmelt, sorry. Do you have a light on any of the bus ports? One or more will light up when the bus is properly connected. Irrespective of that the test button should

Also, Update the firmware (will give you the ability to adjust your baud rate) Turn ON Auto-On Enabled UART 0 should be set to ASCII These things seem way more complicated than they need to be.

Man.. Lifesaver. I'm doing one of these on Friday. Think I might owe you a frosty beverage. Thanks!

The only module in the Crestron Marketplace is for a TSTAT. You've seen one for the Snow Melt somewhere? Yes, we have the 482 and my field guy was just connected directly to it from his computer with

You have the 482 gateway connected to the Tekmar Bus Correct? Pins on the ethernet connector on the 482 Gateway are 4,5,6 – the document shows this Modules exist for all of the Tekmar items. Adam

Hey everyone, just in case you run into this monitor, the baud rate in the manual is incorrect. It also does not match the smaller version of this monitor. The actual baud rate is 115200, not 38400.

Just a quick note to let people know that I've added a new post to my blog, Topics in Home Automation. The post is titled "Focals Smart Glasses". It is the eighth part in a series of posts on applying

What city are you getting this box for? I've done several 101-T and 201-T here in NYC Sent: Tuesday, January 22, 2019 3:12 PM To: Crestron@... Subject: [Crestron] Re: Spectrum 110-A We

We will see. The new remote looks to have fewer buttons, kind of like what Comcast did with their Xfinity remote. I'm guessing that will come with a new set of IR commands even though most buttons

I am dealing with one of these now. I was able to find the protocol:

CE9.3 Sent from my android