开云体育

I can confirm this.... I tried a 1 on "SETVALUE" and it "worked" using a fader but it was super laggy and jumppy. Not usable, looks like its back to the london 4.2 version......

I was using the new modules. the V1.0 ones. ccijeff. I was receiving no feedback on my TP, or within Audio Architect. I was using a standard button, linked directly to the toggle on the BSS module. I

Regarding `Value` on the BSS BLU Level Control Module v1.0: A note from the help file says "A debounce value of 300ms has been added preventing this value to be reset to quickly, thus safe guarding

Thanks for the responses gentlemen. We had previously used the Crestron Soundweb London module v4.2 modules with good success. scottcoumbe - was your intermitted toggle issue experienced with the new

Hmmmm... The module toggle inverts the current state. Curious if the fb value was correct/tracking on the module?

To Add to my early comment for fader control. In VTP I set my fader to have a min of "0" and a max of "100" in Simpl I have my "SETVALUE" held high with an interlock for when I am on my "Audio control

If I recall correctly just add a "1" to the "SET VALUE" then any analog change will happen. You might need to change the fader type in VT to a Percentage value.

Just started working with the new BSS Mod and I can control a level with up/down buttons but is there no way to control it using a fader (on a tsw-760?). I thought the analog "value" signal would do

I'm controlling a bunch of these all over at a large site I'm working on and they are pretty easy to talk to. I haven't found any issues or mistakes with the protocol manual. The < and > are literal,

Great, thanks for all the helpful responses. Crestron@...> wrote:

"Is the < > and spacing literal? Are there delimiters?" Yes, and the greater-than *is* your delimiter... :) - Chip

Have a job with these. The Ethernet cards are installed and am wondering if there is a module for these?

What Mark said. It's easy to control and pretty much anything you can do on the web interface, you can do from the API. To check your protocol, just connect using a terminal program and send the

Yep, very easy to talk to and I believe the <> were literal and no delimiter that I remember. Mark [Crestron] <Crestron@...> wrote:

Anybody talked to this ceiling array mic yet? Has a protocol document, but it's a little... underspecified. Is the < > and spacing literal? Are there delimiters?

I have used these on a few jobs. They are pretty good. I could be totally wrong, but there are a few things I have found. When using a stereo mixer you have to have 2 modules in place. one for the

Thanks. Remember, I didn't write the initial implementation of this; I just fixed a number of bugs, got it all working, and then inherited the code from the original author. I've put out all the

There are a few BACnet PC programs that will let you see and change values. If the PC on that network can see them then..... Setting up the BACnet 'tree' correctly takes a bit or understanding of how

There are detailed instructions in Online Help Answer IDs 5589 and 5283.

Hi Guys, trying to integrate an HVAC system via Bacnet, i have set the below: Hosted bacnet Device: Object ID: 4194302d Object Name: CP3-HVAC Port number: 47808d Hosted bacnet Device: Object ID: 110d