开云体育

Thanks for the reply Andrew! I tried routing video with both symbols undefined, but I didn't get anything, so I guess I'll have them confirm they have it patched correctly before I go any further. I

You don't have to put anything on that symbol. The video will pass without a tx or rx defined in the program. If you need to control a device on the Room switch, it HAS to be on the same network or

lol, i dont have a weekly list . . i check all my sites 10-15 times a day during compiles.

Okay, this must really easy, and I'm an idiot, or our friends NJ are missing something pretty basic in this design. I've got five rooms, each with two 8x8 DMs. One DM is in the room, and has local PC

Thanks. As I said in the introduction to the blog, I'm shooting for weekly updates. Hopefully, that will keep me from getting burned out writing it and will allow me to keep coming up with interesting

You're definitely an asset here. I added your blog to my daily list and hope to learn a lot from you.

Thank you for your response. . . I will look into that option in future jobs. unfortunately design takes precedence and I know we have used mag-locks many times at other jobs in the area. I am

Thanks but unfortunately his locks are about waist high . . . the doors are more like those in retail storefronts. keypad solutions are out.

Kwikset announced a new lock at Cedia that looks very nice and might be a fit for your project. Checkout the obsidian lock. Be aware it won't be available until next year.

Hi All, We experiencing some issue with v3.0 moduel from market. sometime the volume get stucked to max or min and there's no way to get back to work until we change the value in the symetrix

Wait - what?! Seems like there are no ears in Rockleigh. Crestron@...> wrote:

Be aware that mag locks are generally a bad idea/have a number of inherent problems and in an increasing number of places outright prohibited by code with few exceptions (in order to be safe they need

Their 200+ page "Programmer Guide" lays it all out, but authentication and communication over TLS is required. Any type of SSL would require the module to be built in S# and would only work on

It's trivial to do with SIMPL+ of course, I never touched an adagio system so not sure if that's an option? If not, it's easy enough to do in SIMPL, but slightly cumbersome depending on what you need.

You have a string like "12", right? atoi(CHMajor$) will return it as an integer 12, and you can use chr() to convert that to "\x0C" (12 in hexadecimal as a single-byte string), like

YES! and its kicking my arse. Channel up and down are easy they are fixed commands but the direct channel entry is beating me down today. I have tried itohex and everything else under the sun,

ItoHex? Are you doing channel changing on a samsung pro model?

I wanted to let people know that I've started writing a blog on home automation. The blog gives me the opportunity to pass along the experience I've gained over the last 25 years as both a home

The reserved joins are in database for each panel. To assign them to an object in VTP, use the triangle drop-down beside the join in Property Grid. If you have join numbers showing, it will display

"Problem I have with sliders is when the customer touches the top of it and the volume ramps to full. Doesn't matter with lighting. " This is my biggest problem with the new Avia DSPs. The only option