开云体育

Mersive Solstice is very cool and supports AirPlay.

Jeff, Yep. Open existing file in WinDEAL, save as new file without the carrier and walk away quietly. If you try to fiddle with learner related options with no learner connected, WinDEAL can lock up

I've done something like that in Simpl + with the levels and which dimmers/dali groups are affected by each preset. 150 presets and 380 channels... All stored in NVRam with an export/import from a

When did we get our Firmware/Software back on the homepage? I missed it.

Can someone please help with some advice on this module issue/how the display wants the commands? Here's some examples of how the module is outputting the Digital TV commands which work great: Ch 47.1

Typically, when a client is asking for “manual controls” such as an audio mixing console, I recommend that the mixing console not be controlled. Instead, let the mixing console be an audio source

The only difference there is your line ending. Crestron turns \n into \x0D\x0A, while your second command only has \x0D (aka \r) Some devices are flexible about line endings, but

Crestron@...> wrote: Phil, Do you mean just open the IR file in WinDEAL and save it without the carrier, but don't try to use the IR learner feature? Thanks, Jeff

Well, of course you have to have a max number of loads and scenes, but I would presume that was assumed. That said, I can quickly change my max quantity. Crestron@...> wrote:

Heath did this over a year ago in S#Pro.... It would be very difficult to achieve a truly flexible architecture in SIMPL to accomplish this. It's not impossible, but because of the nature of SIMPL

Wow - so sour. I have one, but it's not vetted well enough to put on here. Perhaps after I get the time to run it in my house I'll post it. It's based off a Dynamic Presets file from D3Pro.

Writing code for a set amount of lights in a scene is not that difficult. I'd love to see someone write code that allows the customer to select any light and add it to a scene or create their own

Hi, I have to interface an system AIRZONE in Modbus Someone would information and application module about? Much Thanks

I just had an instance where sending RSPW1\x20\x20\x20\n would respond with an OK but the serial port would not stay on after a power down. Sending the same command but in Hex

I don't know anything about lighting boards, but for mics Yamaha has mixing consoles with Crestron modules.

We've been very happy with the Christie Brio. AirMedia is very poor quality from what I've seen demoed. I don't think we've installed any. Crestron@...> wrote:

One of the easiest may be to build a web page that can accept HTTP post data and dump it into your database for display. The URL would look something like

Our college is using our own web page as a replacement for roomview. We have xpanel on it and ip cameras but I was wondering if there was a way to get Signals that typically go to roomview, (i.e. lamp

We are considering using AirMedia, AM-100 or the extron sharepoint 200. Does anyone have thoughts on these? Which is the best? Is the a better BYOD from another company? Thanks

No problems with Windows 10 and have been running it since the Tech Preview *Mike Jobson* Director UX Digital Systems Limited Approved Crestron Services Provider