开云体育

Can we just call that thing APAD 2.0?

I've been using Windows 10 for a while now,? just ran Master Installer yesterday and no issues with my Crestron software.

Step #1: Put in some trace messages Crestron@...> wrote:

I have tried various methods to read a file from NVRAM. I can't get ReadStringArray or ReadString to work at all. I had 'marginal' success with FileRead but I can only read the first 14 lines of the

That is awesome! Trey Sent: Friday, February 19, 2016 3:33 PM To: Crestron@... Subject: [Crestron] We got our website back. When did we get our Firmware/Software back on the homepage? I

Thats a great point! Ill look into that. Thanks James

Mersive Solstice is very cool and supports AirPlay.

Jeff, Yep. Open existing file in WinDEAL, save as new file without the carrier and walk away quietly. If you try to fiddle with learner related options with no learner connected, WinDEAL can lock up

I've done something like that in Simpl + with the levels and which dimmers/dali groups are affected by each preset. 150 presets and 380 channels... All stored in NVRam with an export/import from a

When did we get our Firmware/Software back on the homepage? I missed it.

Can someone please help with some advice on this module issue/how the display wants the commands? Here's some examples of how the module is outputting the Digital TV commands which work great: Ch 47.1

Typically, when a client is asking for “manual controls” such as an audio mixing console, I recommend that the mixing console not be controlled. Instead, let the mixing console be an audio source

The only difference there is your line ending. Crestron turns \n into \x0D\x0A, while your second command only has \x0D (aka \r) Some devices are flexible about line endings, but

Crestron@...> wrote: Phil, Do you mean just open the IR file in WinDEAL and save it without the carrier, but don't try to use the IR learner feature? Thanks, Jeff

Well, of course you have to have a max number of loads and scenes, but I would presume that was assumed. That said, I can quickly change my max quantity. Crestron@...> wrote:

Heath did this over a year ago in S#Pro.... It would be very difficult to achieve a truly flexible architecture in SIMPL to accomplish this. It's not impossible, but because of the nature of SIMPL

Wow - so sour. I have one, but it's not vetted well enough to put on here. Perhaps after I get the time to run it in my house I'll post it. It's based off a Dynamic Presets file from D3Pro.

Writing code for a set amount of lights in a scene is not that difficult. I'd love to see someone write code that allows the customer to select any light and add it to a scene or create their own

Hi, I have to interface an system AIRZONE in Modbus Someone would information and application module about? Much Thanks

I just had an instance where sending RSPW1\x20\x20\x20\n would respond with an OK but the serial port would not stay on after a power down. Sending the same command but in Hex