开云体育

They use wavelength division multiplexing to achieve bidirectional communication on 1 stand of fiber. https://en.m.wikipedia.org/wiki/Wavelength-division_multiplexing Crestron@...> wrote:

You could learn a lot with an st-cp and a 1550

Hi sopheap ouk, I have a problem to control through crestron processor and cannot change the IP for it as well. Would you be able to share your module for us? I appreciate it.

Silly question.... How does this extender set work with a single strand of fiber? Is it communicating in half duplex?

Don't be silly. You just need the other version, made by AudioQuest, which has the carbon-based 3-Layer noise dissipation system.

I made the changes as per crestron-programmers suggestion. I also changed the pc to have a dhcp assigned ip address.

So, I guess you'd need the other version of that adapter if you wanted to get feedback *from* the control system? ---In Crestron@..., <steve@...> wrote : Is this what you are after?

mathew.klucznyk@...

Send me an email and I will send you what I have so far

Is this what you are after? http://s16.postimg.org/p31t01xh1/Cto_E.png http://s16.postimg.org/p31t01xh1/Cto_E.png http://s16.postimg.org/p31t01xh1/Cto_E.png http://s16.postimg.org/p31t01xh1/Cto_E.png

I have confirmed that the latest 3 series firmware: 1.500.0013 have broke the module. In combination with the latest databases: Device Database: 71.05.004.00 Crestron Database: 54.00.012.00 Though I

Has anyone controlled a Zoom App on a Mac Mini? I have aneed to replicate the Zoom app inside a Crestron UI.?Ira Beyer

What type of cabling? What you see in dmtools when you do the switching [Crestron]" <Crestron@...> a écrit :

Replace your cp2 with a cp3 or add a rmc3 at your setup Crestron@...> a écrit :

Replace your cp2 with a cp3 or add a rmc3 at your setup Crestron@...> a écrit :

which is the best cresnet to Ethernet interface .. wanna control old CP2 from IPAD

Hello, I am having this exact issue. Would you be willing to share the code for address book search? Thanks J

Anthony, I am having a similar issue with pulling contacts from the client's directory. It will only recover about 15 units on the directory vs. the hundred or so they have. Have you had any luck with

I'm having a similar problem getting SiriusXM Online working with a 2 series processor. I have entered the username and password in the Web GUI for the NSP however I can see in Simpl Debugger that

I think you're confusing the CP2 with the CP2e. The CP2 has no Ethernet port so XPanel isn't going to work.