开云体育

Sure you can ftp over mobile projects - at least for edits. I'm not sure if they have fixed the issue of no manifest.xml (?) created when you first FTP over a mobile project. [Crestron]

We do a lot of mobile projects and you cannot ftp transfer those projects. On larger files loading those projects can take 8-10mins, using SSH those transfer complete in roughly 1 min. Thanks, Owain

One thing about the beta Toolbox is that it unzips the .spz on the computer side and sends multiple files; sending via FTP unzips on the processor side, which (IMHO) saves time on the computer,

I was having some strange problems that I though had to do with my programming / interaction between the different programs in the 3 series. Turns out it had to do with some horribly wrong behavior of

I tried to control a C20 TC4.2.1 yesterday with the Y cable and was totally unsuccesfull. Not sure what went wrong. CP2E processor.. think it will have to be IR control.. pins 2-3-5 to processor

I would try opening the corresponding SIMPL+ files (.USP) and recompiling them and see if that helps at all - the DLLs you listed look like they're SIMPL+ for 3-series compiled output. -- Lincoln

Floyd, the best I have come up with is to store things in the Site manager, but it's a global address book and not entirely practical and it doesn't bring up a set of tabs. Helpful if you're

(I sure as soon as I send this, Yahoo will suddenly send me six emails with similar advice already delivered, but just in case...) Those dlls all correspond to some S+ modules in your program, and

One that I'm playing with is WinSCP. The nice thing about it is that you can click on a site and open a Putty session, meaning it's easy to give it a command to load the program once you have FTPd it.

Don't know about Filezilla, but the Directory Opus program I mentioned can save a tab group and restore it later. You can save tab groups ("listers") as different names, so you can have different

Filezilla (and presumably others) are nice because you can open connections in different tabs for all of your devices on the jobsite, then have multiple transfers happening at the same time. For

Aside from an encrypted connection are there any other benefits to SSH?

I use Directory opus for FTP. I think it also supports (for an extra fee) secure FTP, but don't quote me on that. Directory Opus is a total replacement for the usual windows explorer file stuff. It

Cool... yeah... in addition to the usual fun of TD and RD you also have the fun of + and - for each of those. But at least I know it should work :) Doing some more digging it looks like we might need

I've done several Sony EVI-H100 cameras via RS-422 on 3 series processors. It works well, but I do seem to remember needing to wire TX & RX +/- reverse polarity of what I had expected. Check your

Newbie question, so apologies if it is foolish... I have been working on some modifications to an existing SIMPL programs for a while without issue. My PC recently had a hard disk failure, so having

Have a product (Panasonic AV-HS410 Production Switcher) that I've controlled probably close to a dozen times on the 2-series - RS422, 38400, Odd Parity, 8 bits, 1 stop bit). Now trying to do a room

Works great. Only gotcha I can think of is that some of the devices only support one connection at a time, and will close the older connection when a new one comes in. Nothing too unusual. Best

Rock solid over IP , just make sure you send a command periodically to keep the socket open. If the Extron device doesn't see a command within 60 seconds it closes the socket and the Crestron

I believe this is a ?feature?, last time I called TB when I had a Capture with a bad NIC and they said USB is disabled on latest firmwares. From: "cfm@... [Crestron]" <Crestron@...>