开云体育

Mark- Local Delay Drew- So create a vlan in other words?

Likely a bandwidth issue. We have noticed that when our airmedia's sit on the main campus network, with all the students downloading whatever it is they download, video and sound tend to suffer a bit.

Local delay or delay to the far side? Mark Crestron@...> wrote:

There are really no meaningful disadvantages to PNM, IMO. Especially with the DMPS, if you take them out of PNM [assuming static addressing] you go from requiring two consecutive IP addresses to

we have a client who use different subnet for processor side and video board of the dmps 10.100.0.x. - processor 10.100.2.x - video 255.255.0.0 odd for building1 and even for building2 never have

Hi all, I am gearing up for a university install of about 30 rooms. Each will have a DMPS-300-C. I know these use two IP addresses and that Crestron recommends PNM. What are the disadvantages of PNM

I have not had a problem like that before either. But I have tried this where you hardcode the IP address and ID into the VTPro project, but then when you open the Xpanel I have to enter all the host

One of our clients is reporting that there is a significant delay in the sound with AirMedia. They are using it with MS Lync for meetings and presentations. They have more than one AirMedia's onsite,

Every 4K display I've seen will do 30Hz max at native QFHD (3840x2160), so if your source supports it (I assume you're talking about a PC?) then you should be good. Some displays will do 2160/60p, but

There are two versions that say 4K. You need to be a bit careful. Some have a native resolution of 3840x2160 - these are true 4K displays, some of the first ones required 4 1080p inputs to show 4K

Good to hear.

Hmmm, I have not had any issues with Xpanel. I typically hard code the IP Address in VTpro, have you tried this or are you simply opening Xpanel and setting IP in settings?

Do they all simply scale to "4K"?

I'm sure we'll look into it, but I have no idea whether or not it would be worth it in the long run. To be honest, I've yet to see a Nest thermostat in any of the resi jobs I've worked on (and 99.9%

I can find articles indicating DISH has an open api, but I have not been able to locate any modules. If I can't I guess it is off to build one. Thx Bryan

Lol found the big VOIP setup button on the setup page of the Crestron App. :)

Does anyone know if it is possible to make a sip call from within the Crestron App. I would have thought now but there are all the fixed joins in the Crestron App for dial. hangup connected to server

Hi, Would anyone have IR codes for the new 2014 models of LG? I really only need the full hex DTV discrete code as this is the one that is not working from previous codes. I have a TV/Radio toggle IR

I don't think you could do it if it's HTTPS. I'm a commercial guy, so I don't have a need for controlling these, but I've messed with other devices that used RESTful and JSON over HTTPS and even

Here are two places that have been mentioned in the past: www.automationink.com www.padprintingdfw.com I have no experience with either.