开云体育

How do you guys handles code requests by clients? We know from the questions being asked and the specific requests being made that the client is asking for it for another dealer. I've heard both sides

AMEN! +1. Yes I concur. Sometimes the shiny ball becomes the thing unfulfilled. :-( Heath

Yeah... I'm still trying to find the "new" version of Pro2 firmware that supposedly helps with the loading new program issue... posting on Labs got me nowhere, emailing "people" directly got me

Yeah, but if you write to \\CF0, it will make a directory on the internal filesystem called CF0. So unless you *need* to remove it, you can use the same module on 2 and 3. The 3 series by

n Aug 9, 2013, at 4:07 PM, Paul Walczak <paul@...> wrote: As hard as some engineer chooses to make it. Your rule is correct, which is what I had always done. I didn't realize that I had

+1. How hard can it be? My rule is that volume up unmutes and volume down does not unmute. And changing sources should just change sources.

I'm no help, but wanted to say that I have similar issues with AV2/Pro2 and 6L and EX gateways that do the same thing. I reboot the processor/load and some will come online some loads, other will

It's still supported, though getting firmware out for all the active platforms is apparently quite the challenge. There are people with quite the extensive knowledge and can help. However, I am not a

Hey Everybody. I have a project with about 9 TPMC-9L panels and a RACK2. The panels are setup as IP communications. Everytime I reload a project I'd say about half of them don't reconnect. It seems

You're right there. I keep a cable that has some screw terminals connected to 2 & 3 on a DB9 so I can swap tip and ring depending on if I'm uploading to MT-500 or ML-500/600. Added some flying leads

What panel you talking about? I just tested a 6x and a TPS3000 and they are fine with VTpro 5.2.21 what version you working with?

few days ago i decided to start my own self study crestron. i bought Pro2 Processor and i have all necessary Crestron Software. any help tutorials, videos, resources would be appreciated. Regards,

Has anyone else noticed that you cannot "move" a subpage in vtpro? i am talking the window when you are editing it. You can move a PAGE by dragging with the mouse.... but try it with the subpage the

I have a system run 8 programs in CP3N for 30rooms with TSW550 or TSW750. some TSW550 always show offline in the IP table. The IP table is set correctly, I can even ping them from each side in

Check eBay these remote are around 200.

Why Crestron did that on the SWAMP is beyond me. I don't think I've ever had any bit of audio kit un-mute when changing sources. I think someone screwed up on the firmware development. Hopefully one

Crestron module needs to get "r" from Clipsal interface to start work.

Weird because I modified all my file ops modules to include &#92;&#92;RM as well as &#92;&#92;CF and NVRAM. I recently popped a module into a program which defaults to CF as its parameter is that by

I had setup my mom with a Prodigy system years ago and her PTX-3 dropped and pretty much is toast. Crestron wants $75 estimate for repair, but I couldn't get any answers on potential replacement costs

Yep. There are totally different operators. It's documented in the S+ help files. [Non-text portions of this message have been removed]