Yeah, but if you write to \\CF0, it will make a directory on the internal filesystem called CF0. So unless you *need* to remove it, you can use the same module on 2 and 3.
The 3 series by default will put the files in a subdirectory that is based off the program ID Tag. There are other filesystem calls (FileOpenShared, etc.) that will short circuit this and do exactly what the old 2 series ones did.
toggle quoted message
Show quoted text
--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:
Haven't the paths changed from, e.g. \\cf0\\ to \\rm\\ \\rm1\\ etc.?
Lincoln
--
Lincoln King-Cliby, CTS
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
V: 440.449.1100 x1107 F: 440-449-1106 I:
Crestron Services Provider
-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Chris Schley
Sent: Friday, August 09, 2013 12:38 PM
To: Crestron@...
Subject: [Crestron] File Operations on 3-series
Checking my bases on this.
I'm having an issue with a module on a 3-series processor that works on a 2-series. All I've done to the simpl+ module is set the target to 3-series, and get rid of the s> operators.
Does anybody know if the file operations behavior has changed in any way from 2 to 3?
Chris
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
