开云体育

Heath, Do you even need standby? SRC=0 should 'turn it off', right? Or does standby actually work as a power button like on an AVR, where it shuts the unit down... Q: Is there really a power draw

Dave I'm using nine signals to run the PSPHD. All on the main symbol: Standby, MuteOn/Off, InputSelect, VolumeMain, Min/Max/StartupVolumeMain and PowerOn_F. Two on the amp: PowerOn/Off. I'm not

Thanks Jeremy! Yeah the missing "non-special" multiplexor seems a bit strange. The special symbols include data length and a checksum according to the docs, so it could potentially be better for

I have not used the PSP yet, but I would bet that successful control can be achieved with very few signals, as was the case with the DAP8. When I setup my first DAP8, I used the 'Demo' program and

I haven't worked with these ones, however for similar projects, I've used maritime bilge alarm float switches. Try to find a yachting / marine supplies store and they should be able to assist as

Anyone have any experience with this specific Sony TV? I'm running into a ridiculous amount of issues trying to get it to switch to the composite video input using an IR probe. If theres anything

Thanks, how does that communicate to Crestron? Do you have a link?

It says it can detect "low water conditions", so I would take that to mean it's okay with being normally submerged. Might be worth double-checking. I know another type of tank sensor bounces

I believe the GlobalCache wireless devices are 802.11b, which is a dying breed and may not be supported by newer wireless routers unless you enable 11b compatibility (which slows down

It's been a while, but I would say that best practice would not be to have assigned STX panels on more than one GW. Did you mean ST-1700? or are you in fact using STRFGWX units, all three set to the

Sure, it's useful for routing lots of serial signals together: STRING_OUTPUT MuxOut$; //... STRING value[250]; // value to send INTEGER join; // join number to use //... makestring(MuxOut$,

I have been using lavabit.com for many years.

I am soooooooo happy that they did this as well! Oh, how I wish we could just import the VTP file and it would set up the proper page types and matching names for us automatically! Unlike others, I

I haven't used that particular box but I'll post a file that might work for you. It's for the Comcast DCX3400 - This is Comcast's 'dark silver' remote code set. It's worth trying... IIRC, I had

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /IR Drivers/Comcast Motorola DSX3400.ir

Make sure you have it's IP address listed in the tcpip client. That always gets me. I'm sure you already checked that. And I think you can change the port to something else on the global cache side

I need to be able to bring up the setup screen for the client without having to press MEDIA ,LIGHTS, (Crestron symbol) and GUIDE.. TWICE in a row.. This is clunky and awkwards and the client will

They can get stuck at loading program.. Ive found taking the batt out for a bit and putting it back has usally caused it to load. However I remember having to call True Blue once as it was NOT loading

Thanx Chip! You're right: the QM-RMC couldn't ping the WF2IR. I checked a different Wifi router (linksys WRT54GL) and the connection worked! Back on the original router it worked to. So I don't really

Hi, has anyone used S+ string output to feed Serial Demultiplexor or the "Special" version? I have a module that desperately cries for configurable number of serial outputs (without recompiling), but