It's been a while, but I would say that best practice would not be to have assigned STX panels on more than one GW. Did you mean ST-1700? or are you in fact using STRFGWX units, all three set to the same RF settings?
The only way I can imagine this working is if the GWs are REALLY far enough apart that the panels cannot see two at a time - In most homes, I would think this is questionable...
These are old panels so I assume that this is an old install, yes? Did these work well for a while like this? If so, I would bet changes in S/W might have changes bi directional comm with the program.
anyone else had success with roaming STX?
toggle quoted message
Show quoted text
--- In Crestron@..., "Aaron" <aaron@...> wrote:
I have six STX-1700C panels in a system with three gateways. All six panels are defined on all three gateways so the panels can roam. The issue I'm having is that there is a significant reconnection delay after waking the panel from standby. I don't remember ever having this problem with STX panels in the past. Has anyone else experienced this, or were these things sitting on a shelf next to a TPMC-10 for too long?
