开云体育

Yes, you should be able to do this with any touchpanel.

Just noticed that you can right click drag one mlx-3 onto the other and select Duplicate Device Programming and it will copy all the subages over as well as the programming. The pages all show up as

Take a look at Barix (www.barix.com). They may have a product or combination of products that can do what you need. A lot of their products have a IP or RS-232 protocol for crestron integration.

I've been using Crosspoints for my party mode for some time with no issues. ?I use a separate Econn for each of the 24 rooms in my module and handle the disconnect/connect from there. ?I use

Keep in mind that if you can't do it from a script, the DMPS firmware is in a .puf at least - you can double-click it, pick an address from the address book, hit "go", then go and immediately

I really want to see if it's doable with atc audionet card--then UI can be limited and customized

I already asked this question to TB, since the DMPS has so many different parts to the firmwares, it is not possible to update them with a script. From: fabiodaubermann

We have a project with a bunch of DMPS-300's around and I am looking for a way to update all the firmwares using a script (it takes a long time per processor). I have always used scripts to upload

I've usually implemented party modes as a hybrid in my resi systems. I have a Party Mode AV Zone ECROSS which is what the interface CCROSS connects to. Then, based on the the user's inclusion or

Happy Friday All, I've been reading some of the other threads recently about crosspoints and it sparked me to want to throw my question out there. I've been using crosspoints a lot lately and have

Somehow they fixed my tsw project. They are not telling me what else they did other than having me use the latest Core 3 UI controls 1.13.21.01 that they sent me to open and recompile. Fingers

It's been a few years (maybe closer to a decade) since I've looked at it but one option -- if it hasn't been deprecated by Microsoft in the interim -- would be to use a Windows Server with Windows

Have a client asking (well my interpretation of what he is asking) if we can set him up a private internet radio station and then have several of his business locations tune in to it. I was thinking

Everything on the control subnet is DHCP... I thought the whole point was that you didn't have to manually add entries, and as long as the devices were DHCP the processor would automagically handle

No, I just triggered the connections from debugger. Thanks for that command, I will try that next time. Based on the feedback from you guys, looks like I'll have to restructure my module. --

Also, are your devices setup as dhcp? I believe that is a requirement.

Have you tried using the console command 'routesymstat' to ensure your XPs are connected where they should be? That's where I start when troubleshooting XPs. wrote:

Yeah, thanks Chip, actually just looking at it now. I need to control it over IP. M.

If you download the manual for that piece, there's a whole section that goes over the command line interface that you can access either over RS232 or TCP/IP. - Chip

Yes custom generated themes are working fine on the new iPad app. We have been testing new themes from ElevateGRFX without any real issue. Only issue was that we were using a non support font so we