开云体育

Here's a snippet of some code that will do what you want. The problem you were having is that you thought that \x was actually part of the character string you were receiving from the device when

http://support.crestron.com/app/answers/detail/a_id/4294/~/pc-hardware-and-software-requirements-for-running-crestron-software

Even Crestron FAQ on this is confuzing. They state that when a OS is no longer supported Crestron will no longer support it. They then have a link to Microsoft showing "unsupported" OS' which says in

You know what would be really cool. If Crestron supported some version of *nix. Thats a class of stunningly stable OS'. But that will never happen. While I hate Apple, you Applers should be using XP

Is there any official Crestron statement on how much longer it will support XP ? I want to know when some Crestron tool will not work on XP. I prefer XP over Win 7. I have both installed on 2 separate

If there isn't a device extender for it, your only choice is to have the panel on Ethernet, open a TCP/IP client connection to it and send the command that way... - Chip

can we check and turn that off from within simpl? It would be nice to add that so if a panel got replaced the program would turn that off. Then I could remove the PAGEJOINXMIT sticker from the top of

Did I f*** I started to get pretty depressed and was wasting a lot of time on it... I would be pleased to hear if someone else managed to get it working. Do you have the same model as this? What

If I recall correctly, there are heating and cooling 'anticipators' in the setup screen on the tstat. Sounds like the cooling one may be set a bit too aggressively.

So my house has started running "cool" cycles for the year and I'm noticing that the cycle times seem much shorter and more frequently than prior years and actually if I look at the temps the temp is

FYI. One thing that got me on my last tvone job is that the IP had been set to "on" and that killed the com port. I think if it set to "auto" or "off" the com port works without issue.

Can anyone recommend a thread or example s plus module that shows API XML polling and parsing. Few web servers I want to make modules for that use http requests and return XML. Sent from my pocket

My model is actually the UN65D8000X but I would hope input would be the same, not?

The generic CEC mod does not switch inputs on the Samsung. I really need it to do that. I was told it needs to defualt to HDMI input as people keep playing the damn input buttons so when they next

It was the Page Join Transmit.....always the little things Thanks

or what you could do, don't use the activity detection and connect all you digital join press to an or gate, attach the or gate to a ros trig. attach the ros out to an os gate [trig*] ( put a 0 on the

And on that note, if you don't need the page join feedback you can turn off Page Join Feedback Transmission (without connecting to a panel PAGEJOINXMIT ?) -- I'd say that's certainly not helping

I also have an ancient Pro2 (IIRC, when I got it was running CUZ 1.00x) with 32MB of RAM running the latest release (it might actually be newer than latest -- I need to double check) and no issues.

Same here, Chip. I have a rather old PRO2 with the smaller memory and 4.7 firmware runs just fine. Tray Sent: Friday, May 10, 2013 1:35 PM To: Crestron@... Subject: [Crestron] Re: AV2

I expect this may be due to page joins transmitting back from the touch panel to the processor. Hope this helps Jay