开云体育

Is it a new or old model, i don't think there were discretes for power, the newer models have RS232 control. If that is an option i can post a module Iain

You think :) It was very easy to wrote. {Paf} Le 8 mai 2013 20:25, "Chip" <cfm@...> a 閏rit :

First one of these I have had to deal with. Anyone have the discrete power and input commands as an IR file - I have the document with the NEC protocol codes and really do not fancy wrangling with

Hello I would like to have a clear definition of the hows and why's of Main() { While (1) { Gather (); Parse }} From my searching on this group I have found many tidbits of information that make this

I've actually had a look at this list and waiting for pricing on Wyrestorm and Atlona. Have anybody used the Leaf LTHDMI88E with the LTB1E receivers?

Substring and some STOAs, plus logic to accommodate 1-4 character numbers, sure - at the time I was looking for a quick & dirty solution and I wasn't concerned about polling every half hour or hour

Am I missing something or would a substring (possibly two) not suffice? (Or is it cool to do everything in Simpl+ again?) JRW

Hello! I am the owner of an RV which uses Crestron components for controlling many functions in the bus. Lights, shades, audio/video. The programming was done by a German company back in around 2006.

Binary does not make a 16x16 to my knowledge. Can you link?

Must be setup first using leviton usb progtamming dongle. That is how you set the id and which zwave device it's looking for to communicate with Trey please excuse typos, courtesy of my Samsung Note

Is anything else required for setting up the z-wave door lock with Leviton VRC0P? Do you need the Leviton USB or Remote to program it or can you program it from the DB9 on the VRC0P? Cheers

Wow that is a whole lot of extra work. Why? - Chip

How large did you declare the STRING_INPUT to be, and did you make sure to put a serial gather in front of the module with either 0D or 0A to make sure you get the whole message? It looks like the

Give it a look - it's not all that difficult. I think I used to have some modules in the file section for various Google chart things - don't know if they've gotten purged or not. - Chip

+1 for JAP (Just Add Power)

I'm glad you isolated it. I'm afraid I'm not the one to read the error log and tell you anything - especially why it should knock out a TSW. What are the URLs you're using to connect? I know with the

whoops... I just re-read my post and realized it should have said "and, is the sole REMAINING culprit in the whole Crosspoint issue."

Hey Heath, Update on the TSW-750. After hours and hours of messing with the thing and rebooting until my eyes crossed, I was able to isolate the issue down to a Embedded Video object that was pointed

Thanks Seth, Turned out to be a network/VLAN issue preventing communication. Ping command from PRO3 would not find the QS unit. Tray

Even the least-expensive Digital Loggers device supports scripting, and could easily cycle an outlet once daily. http://www.digital-loggers.com/lpc.html [Non-text portions of this message have been