开云体育

A cable with different connectors on either end cannot be considered "straight through". :) - Chip

I've got the same error if creating a new project and save in the default location called "projects" folder where is in server. No problem if I change it to "Public Projects" where is in C drive.

It's very easy to setup, and I've done it dozens of times. If you need to see a live example of the code let me know and i'll get you something. Regards, Cody

I just fixed this issue today. Here is what I did. Analog equate driven off econnect room id that triggers an abuf for each room that sets tp's analog fb to vol out of that room. I have 3 sets of

I attempted this several times and I still can't come up with a viable solution. I am going to do my best to explain this and if anyone wants to help it would be appreciated. I want to use a slider

Hi After eventually seeing green ticks next to all my equipment Including idoc :) i decided to try and upload And then...... An error occurred while synchronising Details... Type mismatch What does

I'm not sure why everyone is having such trouble with Grace. When I asked, I got a message with attachments including the IR protocol and IP control info. Sure - it's UPnP, but they shared it freely.

Got ya, thanks!

Near camera will be selected whenever you are on camera 1 or 2, Video inputs down below what input you select drives the traffic of control. Put signals on it, watch it in debugger. From:

Literally Right now am fitting sub pages into a 6L from a 4SMD cause the company sold 2 Idocs in a project... -- *Jesus Tossas* * * *Technology Architect, Audio Engineer, Programmer* * *

I'm with you there...

Basically, the above. We've taken over an old analog distribution system, and recently replaced an old Fujitsu plasma w/ a large Samsung LED unit. No problem while on component distribution. We were

Honestly I hate to code Idocs...

Do you mean select near end camera to control camera 1, and then select near end camera again, and it toggles to camera 2 control?

Yep when you select the camera on the module it directs the command to the second camera. Done it bunch of times From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>>

I am looking at the Polycom HDX 9000 v3.3.3 Crestron module, and not exactly sure how a person would control two Polycom Eagle Eye cameras connected up to the Codec?! Two local cameras that is. Has

That will only work for table dock, don't think will work for in wall. But yes for one siting on the desk will work. Crestron needs to come out with these quickly for lightning. But for that matter

Seth, you're saying to forgo the puck?

The non wall dock work fine, if you go from the cable that goes into dock, put that into lighting adaptor into iPhone or touch. You good. From: Bart Podkowka

Yes Airplay is fantastic, just stuff system with bunches of Apple Tvs, name them individually for family etc. No Control just message go to Airplay enabled device you good. MC3 pandora, airplay no,