开云体育

Rolled back my database, it complained about the file having been open with a newer db but then compiled fine. Will be onsite tomorrow and can see if anything weird pops up. Bringing one of my

Let me preface this by saying I have not tried this. But I think the following work work. 1) An Serial to Analog symbol (OP103) with a parameter of 0200h. That would convert every serial character to

I've used the method described in this previous thread, and it works great - http://tech.groups.yahoo.com/group/Crestron/message/140142. Thanks go to erikm.

no I was not told this.

to hell with starting over, that is why i keep incremental backups of my client programs. guess i am rolling back as well.

Essentially at the time of the onsite visit the program is 90% or more done and the progress payment(s) combined with the down payment reflects that. By the time the onsite visit comes around, for a

I feel like I should and or do know this yet can't get this right. I'm looking to detect an empty string from a MMS-2 via a SIO. Double quotes doesn't work, neither does \x00. In particular, I am

Did they tell you it was unsupported but you could start from scratch creating a new project in the newest d3 version and it would be fine. That's what I was told by tb.

I am hesistant to say what they told me. so I will just answer your question. I did not receive a file. I rolled back my database. From: Crestron@... [mailto:Crestron@...] On

The squeezebox, plus the controlworks module works faily well. You will need either a dedicated PC, or a ReadyNAS as the squeezecenter talking to the crestron, and the ReadyNAS in turn connects with

apologies in advance as I'm very new to this. I'm trying to control a Pioneer Elite SC-05 through an MPC-M10 using the SC-05/SC-07 module from Crestron's website. The problem is that when I power the

The panels can sit on either charger, but the wall worts need to match the imc. The imc will say on it which voltage it is.

We are looking into CCS and ihiji, but I have to admit I've been to busy to do a physical test with either one. -J

The project folder is wherever the .SMW is saved. If you want to get rid of them go to wherever the SMW is and delete the .UMCs/etc that duplicate those in your usrmacro If you use the usrmacro folder

If the new router has anything different about it's IP scheme, meaning the gateway address, dhcp range, ssid, encryption, etc, then you need to enter these into the tpmc 10 setup screen. Press buttons

Dependent on which codes you are using. If using "multi display codes" check ID=ALL REPLY settings in OSD menu. Default set to OFF. "When controlling the monitor externally, select if the

TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you?

Bravo.

http://xkcd.com/54/

Lol. +1. - Chip