开云体育

Hello Josh and Bambam, Did you all use the 1Beyond Automate_VX_v1.1 module to control the Automate (PC)? -- Doug G

\xAA\xEE\x08\x00#\x80\x00\x05\x 81 \x00\x00\xEE\xFC ? ?ITC_RX$ The Highlighted keeps changing from 81-88 and then 05y-05z and then 05{, 05}, 05~, 05| etc So the feedback is not triggering my logic

A big Thank-you to Doug, Bambam and Josh for replying; your input is much appreciated. I just came back, was out of town for a few days. I wish you all the best!

Hi Lincoln, was looking for something that would have a freeview TV tuner and the usual smart apps installed rather than a display monitor that would need a seperate Tuner/streamer/App hosting box. I

Thanks, I will order one of these in and give it a try.

I am unable to change the Android version. Once it is changed, the functionality remains the same as TSW. Eric Luckart via groups.io <eluckart@...> 于2024年12月8日周日

The 70 series has no other issues. The model change fee for the panel is 200 dollars. A discount is available for more than 20 units. (If you are interested in cooperating, the price can be

Haha - got it sorted! What i had to do is issue a "appupdate sonos" command at the CLI. This in fact did a downgrade of the Sonos app back to 10.6.2. Hi, i?ve got a TSW-760 panel running in my

Can you update the android version on the panels? What about the app version, like the sonos app on a x60 panel to support the s2 app?

Hi, I wouldn't make to work using IP, trying 422, I am using: OSL:BC:1 to start auto tracking I am sending: \x02OSL:BC:1\x03 OR \x02\x4F\x53\x4C\x3A\x42\x43\x3A\x31\x03 And is not working, anybody has

I haven't used them with the X400, but I have used them with Q-SYS a couple times. Are you trying to set this up with AES67 or Dante. The behavior of the commissioning page going away is expected,

Just wondering if anyone has tried or had luck using the ubiquiti pro switches with the new AV firmware that supposedly makes them work with NVX and NAX systems.? Wanting to try on a small NAX system

Hi everyone, I hope you well. I needs some assistance on controlling the above ITC device and each Mic on press should trigger a camera preset. On Simpl debugger I am able to press the buttons and

Do yourself a favor, and under-promise on how awesome/perfect it will be. If you try to make the camera shots really tight on one person, it'll often be not quite right, and you'll spend a lot of time

Has anyone been able to create a successful link from a Biamp X400 to the Crestron NAX Amplifier.? ?I have setup the Biamp to be in AES67 mode.? I can route any NVX-E20 or E30 to the Biamp with no

I've done a few of the earlier units now, the non S2 models. I found them to be ok.? And I've not had any bad feedback from the client but it does seem over priced for what it is.? I remember back

I am working on code for an IV-SAM-VX2-S Automate w/four 1 Beyond IV-CAM-P12-B cameras in a boardroom.? The 1Beyond Automate_VX_v1.1 module Help file is not very helpful so I asked TrueBlue if they

Legend. Thanks mate. That's a shame. The camera feature was quite handy in this case!

Confirming. Put back the old one.

Can anyone confirm for me that the TSW1070 does not have a built in camera like the TSW1060 has?? I have a need to record the video stream from my kitchen touchpanel and I recently upgraded it from a