开云体育

Hi, Does someone have experience with qnect ip cameras and crestron. Or is it even possible to use them with crestron. I would love to hear if this is worth my time and how I could do this.

Nice. I've been lightly messing with the original version, The addition to set joins is a good one.

So, I ran into an issue today with Media Player favorites, when the Favorite is a Spotify playlist.? The Favorite would populate in the list, but nothing would happen when selected.? This is a

Thanks George! I definitely have it on my list to get a HA Green and try this out. Thanks again Jay

Long overdue but I finally got the chance to upload my improvements to the original module here: https://github.com/georgesak/home-assistant-crestron-component It's running very stable in my home,

Maybe a better solution is an HDMI switch with discrete input selection and feedback. It could act as the main source switch and input anchor. If feedback works reliably this will provide a known

Only if there is a way to reset the device to a known input, and even then I wouldn't bank on it always being correct.

Hello everyone, last week I had set up a VC4 on my linux virtual machine, following the instructions I did hardening of my machine to be able to debbug my test softwares. After hardenning and adding

Hello All A Newbie question but I did some searches and didn't find anything immediately. IR Controlled Device 5 Inputs No Discreet Codes I understand that there is potential for this to get out of

Thank you, ill check this when I get back onsite

Thanks for the quick reply - I did not think I needed to control the visibility of the Smart Graphics Embedded Video App, but that is all it was - thanks again.

if i connect in the front USB asks for password. if i connect in the rear USB, it doesn't ask, and i have console. But the rear is for the A/V only as i read, not for the processor. Correct me if i'm

What firmware is on the cp3? I do know some of the earlier firmware had self signed certs that would expire. Also verify the clock on the CP3. SSL requires the clock to be within a few minutes.

yes, the combination is Hw once Sw for 20 sec, but? i will loose and the "out of the box" experience i think. (correct me if i'm wrong, other DMPS-300-C that is not locked, when i connect with

Anybody have a solution to the Trust Failed when trying to connect a iPad to a CP3, i have a project with 2 PRO4's and 3 CP3's, i have ssl turned on and each processor has its own ipad page, when i

Aqara designs and develops hardware and software solutions for the smart home.They have over 12 million customers in more than 170 countries and territories.My latest article, " Aqara Introduces the

Hi Tony, There is an URL parameter that I've recently added support for on the PushOver module.? I can't remember if I've uploaded that version to my GitHub yet, or not.? Unfortunately, that

Jay, could a URL scheme be included in the Pushover notification, to allow opening another app (such as Crestron Go)? I've done it with text messages before, but haven't tried it lately.

The IP table entry for inter-slot communication is 127.0.0.2 in all programs that need to talk to each other.

I don't have the time right now to get into all the details of your design but the first thing you need to do is to change the IP addresses on your inter-slot EISC symbols to 127.0.0.2 That is the