开云体育

Thanks for the help. Got it to work. Issue was the setup/init sequence. Once added, the cam control is good to default id of 81.

Will only be free for a short time

I like the idea that's free, that means I can use it on my deGoogled phone.

I know this isn't the answer you're after, but if you want to save yourself development time (which you may have already spent), we have a module for this:

Roll up, Roll up, get it now while it is still a free upgrade. Looks like this has been released unfinished as usual. Missing local project option in project settings. Missing the notification

That’s better then nothing… Michael Restrepo | Owner Restrepo Innovations 825 Windham Court N Wyckoff, NJ 07481 Office Phone & Text 201.405.2022 Direct | 201.952.4624 Email |

i have the beta - works OK

I went through this fairly recently, Aver has a module on their website ( Download Center | AVer Global ) ( https://www.aver.com/Downloads/search?q=Crestron%20Control%20Sample ) that definitely works

ckangis? Correct.? Spotify playlist would not play when selected from the media player app on the touchpanel.? Pandora worked, but not Spotify.

Aver Cam 570 Seems that the posted control module from App market does not work with the 570 camera. Anyone get this to work. I have tried several versions of module for control. Get no replies at all

Good news: Crestron Go for Android is finally in the Play Store. Bad news: I can't get it to work on my phone (Pixel 8 Pro), so can't tell any clients about it yet ? It seems like there are some

The web interface will seem to load even if you aren't authenticated, or the service isn't completely started up. The best indicator that you're *actually* connected is when you see the hostname

make sure you are going to https and not just http.? http works but exhibits the behavior that you are describing.

I wonder if driving the QueueActionReplace whe the player is engaged/inuse would help?? I just love iterating over weeks with these kinds of things when Crestron, Sonos (and to a lessor extent

In the *OLD* days before many devices had full discrete command sets, we used what was called an 'anchor' command. Basically, any routine that would put the unit into a known state that then a series

Hi All, I was wondering if anyone could steer me in the right direction to send this POST command through a TCP/IP Client? This is where I am at so far: Sony documented command: POST /sony/appControl

In this specific case it's a Topping DAC (DX5 Pro) but to some degree this is a learning exercise also.

I just ran into this on an NVX system. Laptop direct to the LCD works as expected, laptop looped through an NVX unit to an LCD drops the first few seconds of audio - no network involved, just the

This sounds a lot like the issue described at /g/crestron/topic/104387070.

What is the device (brand/model)??