Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: TSR-310 impressions
No experience with the TSR310 with CH but with Simpl and VTPro I have had no issues. In my experience,? it is the best remote Crestron has ever made. Handheld wise. On Mon, Feb 5, 2024, 8:43 p.m. <michaelgwilson@...> wrote: Thanks for your input Pat.? Greatly appreciated. |
|
Re: TSR-310 impressions
¿ªÔÆÌåÓýIf you like your sanity, skip the TSR-310 even though it is a great remote on Simpl jobs, it is not so great on CH projects.? I would definitely go with the TSR-310 as they have been rock solid.? The TSR-310 is sluggish, loses connection to the control system and will make someone want to go crazy.? Haven¡¯t had any complaints on Simpl and Studio projects.? Just my $.02 ? Pat M ? ? From:
"[email protected]" <[email protected]> on behalf of "michaelgwilson@..." <michaelgwilson@...> ? I'm looking at adding a TSR-310 along with some HR-310 remotes to a Crestron Home setup.? The TSR-310 looks like a great remote but I have read numerous complaints about connection issues after the remote goes to sleep to preserve battery
life.? I have also seen that there is an updated firmware for this remote that is supposed to address this issue and provide faster connection when the remote wakes up and also overall performance improvements. |
|
TSR-310 impressions
I'm looking at adding a TSR-310 along with some HR-310 remotes to a Crestron Home setup.? The TSR-310 looks like a great remote but I have read numerous complaints about connection issues after the remote goes to sleep to preserve battery life.? I have also seen that there is an updated firmware for this remote that is supposed to address this issue and provide faster connection when the remote wakes up and also overall performance improvements.
Can anyone that has this remote in their installation comment on how it's performing with the latest firmware? Thanks. |
|
Re: Arris Cable Box
¿ªÔÆÌåÓýI believe the -M indicates it is a Motorola.? There is a DCX3400 in Crestron DB. ? From: <[email protected]> on behalf of Rohan Dunbar <surrounded360@...> ? Does anyone have an IR file for an Arris DCX3600-M? |
|
Re: UC-MX50-T design question
Add a control processor, switcher with audio de embedder and control sources from page 2 on touch panel.. The content of this email is intended for the person or entity to which it is addressed only. This email may contain confidential information. If you are not the person to whom this message is addressed, be aware that any use, reproduction, or distribution of this message is strictly prohibited. If you received this in error, please contact the sender and immediately delete this email and any attachments. On Mon, 5 Feb 2024, 18:53 adks1010, <totesthouse@...> wrote:
|
|
NVX Director Alternative
I remember that it was mention in a thread, I just can't remember when?? Someone had posted an alternative to using a NVX-DIR with 3rd party software.? I have a small system that I am spec'ing and don't need a director, but still want the management side that director provides.
|
|
UC-MX50-T design question
Have a client who has a few conference rooms going in. We had specified the UC-MX50-Z as the best solution. Now client would like to add a dedicated PC at each TV.
Does anyone have a good idea on how to make this work from an audio perspective? Meaning, all of the audio gets distributed to the table top unit and I can't think of a clean way to do any really switching etc. I was thinking possibly a HD-MD4X1-4KZ-E that could manage the last device in concept, but I don't think that would be manageable as the. client would need to unplug sources to get things lined up. |
|
NVX USB Routing
For any one that is interest I've just commissioned NVX USB Routing, working with a Logitech Camera and Shure P300 going through a USB hub.
Equipment: 1 x NVX-363 (as USB Remote as Decoder) (Logitech Camera and Shure P300 connected to USB Hub then into USB-A Host port) 1 x NVX-360 (as Local as Encoder for BYOD) (NVX USB-C port) 1 x NVX-360 (as Local as Decoder for Client PC)?(NVX USB-C port) 1 x MBeat USB 3.0 hub. Is USB 2.0 compatible. I found that USB-C to USB-C cables would not work for the Local ends, had to use USB-C (NVX-360 end) to USB-A (BYOD and Local PC ends) Using the Serial joins on the Simpl Windows NVX? block to perform Auto Join Routing Layer 2 MAC Addresses This was for UC Soft Conferencing system. System Uses Shure MXA910 ceiling Mic and Ceiling Speakers running off Shure P300. I also used the Dante TX on the NVX-363 to route HDMI audio back into P300 for users who wont use USB audio, for local presentations. Hope this helps any one trying to something simular. |
|
Construct and XPanels
Working on creating my first XPanel in Construct. I'm using a project that has resolutions for TSW-760, TS-770, and TS-1070 panels and it works great on those panels. How do I specify which resolution the XPanel uses? When I open it in my web browser some elements look like they're using the TSW-760 breakpoints and other elements are using the TS-770/TS-1070 breakpoints. Things are all over the place on the XPanel.
?
Also, is there a way to open the XPanel on my local PC without having to host it on the processor using "Web Pages and Mobility Projects?" How do you set the connection settings? I found under Project Properties where you set the XPanel IPID but there's no option to set the processor IP address. I wish the documentation wasn't so thin for this program. |
|
Re: Add device passcode to Crestron TS-1070 Touch panel?
If you have a programmed system already then you need to do programming in your simpl code and make pages in VTPro to make that happen.??If it is a new system our??software??nVision Hydra has that feature built in it is just a check box to enable and set passcode. |
Gumppy66
Gregory Oldacre