¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Sony Professional Displays IR Driver

 

Hey Ryan,

You can find an IR Driver for the Sony BZ30L range on Crestron¡¯s Certified Driver website.?




Cheers,
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

I can corroborate that...unfortunately.
Re: Sharp 4P-B86EJ2U Control

 

¿ªÔÆÌåÓý

"POWR? ?1\x0D"

Sorry, fat fingered.

From: Steve Adams <steveadams172@...>
Sent: Saturday, December 23, 2023 1:08 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] Sharp 4P-B86EJ2U Control
?
My experience?with Sharp displays is that the power commands can be either "POWR? ?01\x0D" or "POWR1? ?\x0D" for POWER ON and "POWR? ?0\x0D" or "POWR0? ?\x0D" for POWER OFF. You may also have to send "RSPW1? ?\x0D" or "RSPW? ?1\x0D" once the TV is powered on manually to prevent the RS232 port from going into standby on power off. Unfortunately Sharp has been famous for changing the formatting even on the same model depending on when it was manufactured.?
From: [email protected] <[email protected]> on behalf of dontrobthemachina@... <dontrobthemachina@...>
Sent: Friday, December 22, 2023 3:01 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] Sharp 4P-B86EJ2U Control
?

[Edited Message Follows]

When you said you¡¯re sending CR, you¡¯re not actually literally sending that are you? Should be \x0D (apologies if you knew that already!)

Re: Sharp 4P-B86EJ2U Control

 

¿ªÔÆÌåÓý

My experience?with Sharp displays is that the power commands can be either "POWR? ?01\x0D" or "POWR1? ?\x0D" for POWER ON and "POWR? ?0\x0D" or "POWR0? ?\x0D" for POWER OFF. You may also have to send "RSPW1? ?\x0D" or "RSPW? ?1\x0D" once the TV is powered on manually to prevent the RS232 port from going into standby on power off. Unfortunately Sharp has been famous for changing the formatting even on the same model depending on when it was manufactured.?

From: [email protected] <[email protected]> on behalf of dontrobthemachina@... <dontrobthemachina@...>
Sent: Friday, December 22, 2023 3:01 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] Sharp 4P-B86EJ2U Control
?

[Edited Message Follows]

When you said you¡¯re sending CR, you¡¯re not actually literally sending that are you? Should be \x0D (apologies if you knew that already!)

Re: Sharp 4P-B86EJ2U Control

 

all good. yes, literally POWR? ?0\x0D and POWR? ?1\x0D. Going to resume work on this next week.?
Re: Sony Professional Displays IR Driver

 

I would use RS232 one way driver on an IR port to the 3.5mm Jack. Much more reliable than a bug that could fall off. The BZ range is standard code but make sure you send the enable string whilst the screen is on. I usually send it every time I shut down the system incase the client has power cycled the screen.?
Re: Sharp 4P-B86EJ2U Control

 
Edited

When you said you¡¯re sending CR, you¡¯re not actually literally sending that are you? Should be \x0D (apologies if you knew that already!)
Re: Sharp 4P-B86EJ2U Control

 

yep. did that too. im kinda at a loss
Re: Sharp 4P-B86EJ2U Control

 

Baud rate 9600, the tv also has the ability to change the baud rate in the menu settings, you have to set that to 9600 too
Re: Sharp 4P-B86EJ2U Control

 

ya, POWR? ?0CR and POWR? ?1CR is what we're using. Its acting like it isnt receiving a command however im getting responses in debugger and putty. feeling like its a setting in the display but we've been round and round with them
Re: Sharp 4P-B86EJ2U Control

 

CORRECTION POWR NOR PWR
Re: Sharp 4P-B86EJ2U Control

 

Just did one, going by memory, I think the commands were:
PWR[3spaces]1 then the CR, power off replace 1 with 0
the manual has all the info
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

Check to see if you have Horizon keypads in your program. We've been having the similar issues loading programs and we found a Crestron article from October detailing that there is an issue with D3 and loading programs with Horizon keypads with the latest device database. You have to roll ack your Device Database to 200.295.001.00 and you'll have no issues loading your programs.?
Re: Sharp 4P-B86EJ2U Control

 

For what it's?worth, we did a takeover job with a Sharp? LC-60LE751K.

The only notable thing that I recall was that there was an RS232 to TTL converter between the COM port and the display.? Baud rate was 115200.

Power on/off were?POWR1\x20\x0D and POWR0\x20\x0D?respectively.

May or may not be applicable for your model, but hope it helps!
Sharp 4P-B86EJ2U Control

 

Hey All
Has anyone successfully gotten control via 232 or LAN? If so, how? We've been through all the display settings but can not get it to work, though it seems we are communicating. Same results via Putty - indecipherable Rx. Based on the Rx I would guess baud rate, but trying both 115 and 96 yields no better results.?
TIA
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

Yup. Also had a strange issue with a brand new laptop. D3 will not compile correctly. Had to save it in dropbox, open it up in my old laptop which the power connection is literally hanging out, recompile it and then load. Wasted many hours with TB trying to trace the problem. It has 32 gig ram, SSD drive. WTF.
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

Yeah, saw that.

On a more positive note BACnet does seem to be improved.
Re: Anyone noticing slowdowns/failures in loading to 4-series processors lately?

 

...another firmware update with another supposed fix that doesn't fix it
:(
Re: Sony Professional Displays IR Driver

 

Have you tried the consumer codes? ?RS-232 codes look the same as consumer, maybe the IR is the same . . .
Re: Sony Professional Displays IR Driver

 

o o..
I hope this can help then. You need to to manually save the IR commands and utilize then.
?
I hope this may work.
4781 - 4800 of 256472