Re: Getting iPAD to act like a touchPanel
Thanks, Doug.
I'm familiar with that but it doesn't solve my real issue (unless something changed from a year ago). Plus, I need the iPAD to do other things (launch other apps) even though it is a *dedicated* TP.
I'm looking to disable the lock screen AND still have the unit go to sleep (turn off the backlight) with a touch to wake it again...
|
|
|
Re: Getting iPAD to act like a touchPanel
In a CrestronGO dedicated iPad, I go into Accessibility settings and enable Guided Access.? ?It asks to create a password.? I then open the CrestronGO project and triple-click the Home Button or Side button and follow the instructions.
Here is the Apple User Guide for it.??https://support.apple.com/guide/ipad/use-guided-access-ipada16d1374/ipados#:~:text=Go%20to%20Settings%20%3E%20Accessibility%20%3E%20Guided,Passcode%2C%20then%20enter%20a%20passcode.
--
Doug G
|
toggle quoted message
Show quoted text
On Thu, Dec 28, 2023, 3:49 p.m. Gary Miller <
g@...> wrote:
Yes, unfortunately yes.
On December 28, 2023 5:25:56 PM CST, "MGmail via
" <bigfish.tyee=
[email protected]> wrote:
Does anyone know if the "
" communication link is severed when the settings are changed to accommodate? restron integration?
|
toggle quoted message
Show quoted text
On Thu, Dec 28, 2023, 3:49 p.m. Gary Miller <
g@...> wrote:
Yes, unfortunately yes.
On December 28, 2023 5:25:56 PM CST, "MGmail via
" <bigfish.tyee=
[email protected]> wrote:
Does anyone know if the "
" communication link is severed when the settings are changed to accommodate? restron integration?
|
Re: Crestron Home (MC4-R) NVX Discovery issue (VLAN)
thank you that was it. I didn't initially see that option as the MC4-R was on an older firmware.?
Itai
|
toggle quoted message
Show quoted text
On Thu, Dec 28, 2023, 3:49 p.m. Gary Miller < g@...> wrote:
Yes, unfortunately yes. On December 28, 2023 5:25:56 PM CST, "MGmail via " <bigfish.tyee= [email protected]> wrote:
Does anyone know if the "" communication link is severed when the settings are changed to accommodate? restron integration?
|
toggle quoted message
Show quoted text
On December 28, 2023 5:25:56 PM CST, "MGmail via groups.io" <bigfish.tyee@...> wrote:
Does anyone know if the "" communication link is severed when the settings are changed to accommodate? restron integration?
|
Does anyone know if the "" communication link is severed when the settings are changed to accommodate? restron integration?
|
Does anyone have a Shure P300 module with mute and volume control, just trying to save some time on getting this system programmed, thanks
|
Getting iPAD to act like a touchPanel
Hi All,
Just wondering if anyone has found a way to make iPADs *Feel* more like TouchPanels.
i.e. making the Wake/Sleep process more immediate.
I have only found that if I change the iPAD settings for 'No Password' and Lock screen to 'Never' this will keep the iPAD awake and always available.
However, this causes the backlight to never turn off, which of course is not preferable.
I'm looking for a way to never have the iPAD go to the lock screen AND have the brightness/backlight timeout after x time of no activity.
Anyone found a way to do this, even with a 3rd party app or something??
It would seem that with all the Apps out there that use the iPAD for commercial purposes (ex: Square, etc.) that someone else in another business market would have wanted to do this as well...
|
Good afternoon...I've been searching for a tcl display module manly for model TCL 40s350g any tcl will work because i found the ir hex codes i just need a module to put in the database to edit....does anyone have one they can share?
?
This e-mail and files transmitted with it are confidential, and are intended solely for the use of the individual or entity to whom this e-mail is addressed. If you are not the intended recipient, or the employee or agent responsible to deliver it to the
intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you are not one of the named recipient(s) or otherwise have reason to believe that you received this message in error,
please immediately notify sender by e-mail, and destroy the original message. The preceding does not apply to government bids where sunshine laws are in place.
|
Re: Logitech RallyBar Control
I would agree as you dont use the Network connection when in USB, although if I remember correctly I think you can have it connected for remote updates and monitoring.
|
Re: Logitech RallyBar Control
I believe that's only applicable when they are in standalone mode, not functioning?as a USB device.
On Thu, Dec 28, 2023 at 04:17 PM, Phil Bridges wrote:
Don't the UCs talk over USB?
Never controlled them but fitted a few units.? ?There are multiple ways to connect them, one of which is via Network and using a Tap Touch control panel which is IP-based, so I'm guessing there must be some sort of control over network if it's being installed as a standalone unit using this panel????
|
Re: Logitech RallyBar Control
On Thu, Dec 28, 2023 at 04:17 PM, Phil Bridges wrote:
Don't the UCs talk over USB?
Never controlled them but fitted a few units.? ?There are multiple ways to connect them, one of which is via Network and using a Tap Touch control panel which is IP-based, so I'm guessing there must be some sort of control over network if it's being installed as a standalone unit using this panel????
|
Re: Logitech RallyBar Control
Don't the UCs talk over USB?
This is what I am trying to track down. I know that all of the Crestron UC kits talk to the unit in some way. Therefore, there is a command set. What that command set is a mystery. But as I said there has to be something out there for developers if Crestron and others like them have employed some level of control over the device. All I want to do is change the tracking mode on the fly and sleep and wake the unit.
|
Re: Logitech RallyBar Control
This is what I am trying to track down. I know that all of the Crestron UC kits talk to the unit in some way. Therefore, there is a command set. What that command set is a mystery. But as I said there has to be something out there for developers if Crestron and others like them have employed some level of control over the device. All I want to do is change the tracking mode on the fly and sleep and wake the unit.
|
Re: Logitech RallyBar Control
Which Crestron platform can control RallyBar via IP and where/how do you set the IP connection?
|
Logitech RallyBar Control
Has anyone had any luck wrangling the API for the Logitech RallyBar from Logitech? Their support has no idea what I am asking for however it has to be available for developers since there are multiple platforms, including Crestron, that control the unit via IP.
Regards,
Nathan
|
Re: Control Netgear Switch
you can try telnet, ssh and snmp, all of them worked for me
|
Doug G
Gary Miller