Just thought this was pretty funny.? Updating firmware on an MC3 (I know, yikes) so went to the mothership site to download the most recent version.

Search:? "MC3".? No results found for MC3.

Okay.? Search:? "MC3" Enter.? Results 234.

Page 6.? Page 6 is where the MC3 is.? Behind 6 pages of lighting keypads and other knick knacks.

They are literally so embarrassed of this product they buried it in the search.? Not that I really blame em.? :D

Currently upon every launch, you have to go to the menu bar and reselect this option. Is there a way to default to this every time?

I found the log files.? I have attached them here for reference.


This program restarts itself every night at midnight.

Recently had to upgrade the modules for the Sonos in a program that stopped working completely.
I am using the Sonos System 3.1.1, Sonos Device Module 3.2.0, and the Sonos Grouping Module 3.1.1
I show that the system initializes, but never goes online using debugger.? Is there a better way to see exactly what is going on with the Sonos System Module?
I have enabled debug mode on the Sonos System 3.1.1 module, but the output of debugger does not change, and the help on the module does not say where the?
debug mode writes its log.?

Might I suggest DWService.net as a suitable replacement?

I've been using it for several years and I'll NEVER go back to TeamViewer or similar.

I'll say that the UI is pretty spartan, by comparison, but it works and works well once you "get it" and there isn't much to "get".

Give it a shot and if you have any questions, give me a shout.

you will need to make sure you modify the snmpd.conf file with the root pw of you set up when you installed AlmaLinux.

I run it on a VM. I have a clone of the AlamaLinux VM without VC4 installed then another version where I install VC4 fresh. It is kind of a pain in the ass but when the trial runs out i just delete the VM and clone the clone and do a fresh install. Keeps me sharp on Linux.?

We aren't using VC4 much now since hardware processors are more readily available but I have a few clients who have their one hardware and we have stood up VC4 across their different offices nationwide.

Holiday lighting schedule issues from clients are killing my weekend.? Trying to figure out who at Crestron I need to send my bill to.
In meantime, my personal X10 system circa 1990 is hitting nice every time.

Hi Mark,

Not sure if you've already tried this but...

A myCrestron.com?DNS registration is required to view the camera outside of the home.

from?

On Sat, Dec 16, 2023 at 10:11 AM, Alex Teague wrote:

BTW, I'm guessing enough people complained about the new TV interface. They've kept the ability to connect with the traditional method. I'm not sure why people think changing stuff up all the time is a good thing. It's hard enough to get folks familiar with software and feature sets as it is, let alone when you throw a bunch of changes into the mix. Maybe Microsoft could take a hint.

"They need their mommies to be proud of them"...

The final straw in getting rid of TV was that they told me that the old interface will be deprecated in the next 3-6 months or so...we will see...

+1 for splashtop, we ditched TV almost 5 yrs ago and never looked back..

Harry, I don't think it's related to being on a different network, as this certainly was not the case in my test yesterday.

ckangis, I'm going to have to look at some of the other options out there, didn't realize that there's comparable solutions for half the price. BTW, I'm guessing enough people complained about the new TV interface. They've kept the ability to connect with the traditional method. I'm not sure why people think changing stuff up all the time is a good thing. It's hard enough to get folks familiar with software and feature sets as it is, let alone when you throw a bunch of changes into the mix. Maybe Microsoft could take a hint.

开云体育

I haven't seen a particular issue with Dbug and TV (DBug has sucked without TV for a while now...See another thread for Nathan's Debugger!)
I just got rid of TeamViewer as I have found that the price, some latency issues and being ultimately forced to use the 'new' UI interface, which I do not like, greatly reduced TV's earlier value...
I'm using SplashTop right now and it seems to be pretty comparable at less than half the price.

Thanks Dizzy,
I found I had removed the Analog event after I changed the code to GetC.
Now works a treat. Thanks for your patience.

If they are using a different network to connect to the internet than the one to the devices, it is likely due to routing priority or IP settings error. The connection to the device needs to have a higher priority (lower number) than the connection to the internet. That or your device network’s IP settings should not have a default gate set.

Has anyone experienced issues running debugger on a remote pc through TeamViewer? I connect to a ton of programmer and tech PC's with TeamViewer to troubleshoot programs with debugger (we're a CSP shop). I've come to the conclusion that some, I'd say half, pc's/laptops that I connect to have a REALLY hard time syncing debugger. It takes minutes to sync and is generally super sluggish. When not connected through TeamViewer the same pc works great and syncs almost instantly. I haven't figured out a rhyme or reason yet but was hoping someone might have a clue.

The you need to share all your code, I tested it with the strings you posted an it worked fine, H came out as 72…

On Fri, Dec 15, 2023 at 06:58 PM, @DizzyEgg wrote:

GETC(

No GETC didn't do the trick either

开云体育

Has anyone worked with the newer Strato C players? More specifically, we were hoping to automate the kaleidescape by calling up a script however I am not seeing that an as option in programming.