开云体育

After you hardened the server are you accessing the web gui through https instead of http and it should ask for username and password to login. Michael Ferry

Thanks, that is actually the approach I have taken after messing with Virtualbox and getting VC4 to actually load. My issue now is that My "Add Room" button is greyed out when I access the VC4 via the

Just thought this was pretty funny.? Updating firmware on an MC3 (I know, yikes) so went to the mothership site to download the most recent version. Search:? "MC3".? No results found for MC3.

Currently upon every launch, you have to go to the menu bar and reselect this option. Is there a way to default to this every time?

I found the log files.? I have attached them here for reference. LogA.dat ( https://drive.google.com/file/d/1Zoi1ubXf506gkxmwdg61knePSaQDH3Fj/view?usp=drive_link ) LogB.dat (

Recently had to upgrade the modules for the Sonos in a program that stopped working completely. I am using the Sonos System 3.1.1, Sonos Device Module 3.2.0, and the Sonos Grouping Module 3.1.1 I show

Might I suggest DWService.net as a suitable replacement? I've been using it for several years and I'll NEVER go back to TeamViewer or similar. I'll say that the UI is pretty spartan, by comparison,

you will need to make sure you modify the snmpd.conf file with the root pw of you set up when you installed AlmaLinux. I run it on a VM. I have a clone of the AlamaLinux VM without VC4 installed then

Holiday lighting schedule issues from clients are killing my weekend.? Trying to figure out who at Crestron I need to send my bill to. In meantime, my personal X10 system circa 1990 is hitting nice

Hi Mark, Not sure if you've already tried this but... A myCrestron.com?DNS registration is required to view the camera outside of the home. from

"They need their mommies to be proud of them"... The final straw in getting rid of TV was that they told me that the old interface will be deprecated in the next 3-6 months or so...we will see...

+1 for splashtop, we ditched TV almost 5 yrs ago and never looked back..

Harry, I don't think it's related to being on a different network, as this certainly was not the case in my test yesterday. ckangis, I'm going to have to look at some of the other options out there,

Hi, We?re currently working on a project with Kaleidescape and CH involved. The CH driver for Kaleidescape is very limited. Actually, it?s just an RC emulation. If you want to do more, you need to

I haven't seen a particular issue with Dbug and TV (DBug has sucked without TV for a while now...See another thread for Nathan's Debugger!) I just got rid of TeamViewer as I have found that the price,

Thanks Dizzy, I found I had removed the Analog event after I changed the code to GetC. Now works a treat. Thanks for your patience.

If they are using a different network to connect to the internet than the one to the devices, it is likely due to routing priority or IP settings error. The connection to the device needs to have a

Has anyone experienced issues running debugger on a remote pc through TeamViewer? I connect to a ton of programmer and tech PC's with TeamViewer to troubleshoot programs with debugger (we're a CSP

The you need to share all your code, I tested it with the strings you posted an it worked fine, H came out as 72…

No GETC didn't do the trick either