开云体育

It seems that any comms between toolbox and a 4-series is suffering. I'm working on a 25 apartment mdu. All on latest fw. Every single CP4 struggles with sysinfo or debugger loading. Sysinfo can be

This issue in my experience has NOT been limited to direct connect mode. Nearly a year ago now we installed three UC-CX100-T systems (sans the UC-PR that was unavailable for quite a while) and for

In my opinion the best way to have a vc4 in your own office is to use a virtual machine and stick with the trial version. First attempt to get the vc4 running is quite complex but if you set up vc4

Have them VPN into the house. If you cant get them to use VPN then, you would need to port forward both the http & rstp port for each camera. Setup a DDNS address or static IP for that project You

Hello all. I've just opened an old - unopened mercury system that we bought around 5 years ago, and by that time I bought both the AV and not AV system. I just remember that the only difference was

I'm not familiar with Spectrum's box, but Comcast/Xfinity uses a DirecTV Stream. It uses different IR codes than the DirecTV receivers, but there's a driver in the Group's Files section.

Same, it fails to load about 85% of the time. Doesn’t seem to matter if I try stopprog or just try to progload. It’s simply fails to stop the previous program, then loads the current “old”

Hi, I am in the process of changing my TV provider from Directv that I have been with since '96. I have been controlling my tuner using my Crestron system, both IR and IP without any issues. I have

We are utilizing Luma cameras at this site and they were brought into Crestron Home without issue. They are viewing successfully locally but remotely fail. Firewall policy changes do not seem to

I'm looking forward to this issue being resolved. I can confirm that 2.8003.0037 did not fix the issue with my PRO4. Michael Block

Though COSU was created by Crestron's engineers, it isn't considered official Crestron software (isn't available to download from Crestron's website, etc.). COSU's release and support (along with

I wasn't expecting for anyone to do it for me but at least tell me what to use. The literal response was "I can't help out, management said we're not supposed to". Also, when I mentioned COSU the

OpenSSL CLI is commonly used to generate CA certs. https://www.openssl.org/source XCA GUI is my preferred tool for generating CA certs. https://hohnstaedt.de/xca COSU is yet another option for

This trend is a fundemental flaw with most new, "Cool" things that we are increasingly asked to deal with...IMHO...:) Thanks, Pixels and Jay for the updates...Very Helpful! We'll be looking at the

Hi Kiel - is the 1.14.00.155 update and panel firmware solution still holding strong for you a month later?? UC engines have been such a headache for us at my company I've started having to research

Dizzy You could do Ones = Analog_Temperature mod 10; it would be one less calculation for the system.

Just so everyone knows, and this goes to the lurkers from Crestron as well. I called twice about the Cert issue and both times I was told that they won't help me, per management direction. This is

Hello John, just write a Simpl+ module like this: #DEFAULT_VOLATILE #ENABLE_STACK_CHECKING #ENABLE_TRACE ANALOG_INPUT Analog_Temperature; STRING_OUTPUT String_Temperature; CHANGE Analog_Temperature {

I need a solution for setting up a VC4 in my home office and wanted to gauge what others suggest is the best method, particularly from a hardware perspective. My initial thought was to utilize xio

Hi, I took a quick look at the driver and their latest API documentation.? The driver was written 4 years ago for Kaiterra's Laser Egg models of IAQ monitors (which it appears have been