开云体育

As far as I know the regional portals are only when using Amazon Alexa. For Google you set the region on the module to US and use this link to link your processor

I've seen replacement power supplies mentioned for the PRO2, PRO3, and CNPWS-75, but has anyone ever replaced the supply in a C2N-SPWS300. If so, do you have a part number? Thanks in advance.

I have never tried to use slave before and don’t seem to be able to get commands to/from the CP3 ports. the cp3 is showing online and is slave on the ip table of the rmc3. ?In the Master ip of the

Looks like the number of assistants could be a new masters record …. NFH

I can confirm that 2.8003.0037.01?didn't fix it on my desk RMC4....

Have you guys noticed if the scheduler is actually working? I have a new job where the client is really into the scheduler and it seems to stop working. Its just a regular D3 program in a standalone

Version: 2.8003.00037.01 - Resolved an issue that would prevent a program from stopping correctly.

Don't forget to mention that that is the "discounted" early bird special there too.? After the 1st, it raises to $900. -- Jason Mussetter Control Systems Designer Mussetter Programming Services

I created a case with TB today.? I am manually loading the updated files to the NVRAM\D3_Pro folder after load of the program.

tied logic to a TCP\IP Client on port 23.? Logic enables the connect and then sends the reboot\r to the device.? I set it up to do this if the IPID goes offline for 10 minutes.? I have a project

I built a test program and CP3 Remote Ethernet Processing is available.? When you do the IP table entry on the CP3, make sure to change from slave to master.

I assume that this is only an issue with respect to HZ installations?? I worked on a project yesterday and didn't have this issue with a project that doesn't have any HZ in it.

My latest article, "My Experience Installing the SmartSlydr Motorized Sliding Glass Door Opener” is being published by the good folks at Residential Tech Today Magazine on their web site.

Has anyone had any luck getting into a Cisco CBS switch with the Crestron or a third party SSH module?

Yes, the fee for 2022 Masters in Orlando was $1000 including 3 nights at the Caribe resort. 2024 fee at the same place is $799 which does not include a hotel room.

I just did something like this recently.? I defined a "dummy" relay on the PAC2 and tied the P/H logic to the relay.? Then I added the relay to a Remote System export and got the state of the relay

It may be wise to not mention "privileged" programs in a public forum of mixed company...

Par for the course considering the losses they have taken due to being a hot mess for 4 years straight. When they killed Peak Rewards, I figured they would start being less generous with other things

You'd have to call the hotel and mention Masters. Were the rooms ever included in the fee?

Hi all. Really simple one.? Just wondering if Crestron Voice control via Google Assistant is available to us Australians?? Tried registering my system through Crestron but it wont register.? Found