Clearone Converge PRO 2 - ProcBlock control
I am using the Clearone ConvergePro2 v1.2 IP demo project to control a ClearOne Converge Pro2 128VT.
I have control of the unit but I am unclear on how to control the "ProcBloc" entities which were configured by the DSP contractor.?
Control of the MicLine in and Outs works fine. If anyone can point me in the right direction that would be helpful. Thanks.
|
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Pat Molettieri
Sent: Friday, August 4, 2023 8:48 AM
To: [email protected]
Subject: Re: [crestron] EcoBee Thermostat
?
Intersystems Control in Canada has a Simpl module.?
?
Pat M
?
Please consider donating to the 2023 Helping Hands
280 mile charity bike ride.?? 100% match on all donations through link above.
?
?
Hi All, does anyone have a module for this? I have looked through the archives and noticed the c3-na reference, but it looks like there out of business? Website just errors out. I am happy to pay for a module.
|
Intersystems Control in Canada has a Simpl module.?
?
Pat M
?
Please consider donating to the 2023 Helping Hands
280 mile charity bike ride.?? 100% match on all donations through link above.
?
?
Hi All, does anyone have a module for this? I have looked through the archives and noticed the c3-na reference, but it looks like there out of business? Website just errors out. I am happy to pay for a module.
|
Hi All, does anyone have a module for this? I have looked through the archives and noticed the c3-na reference, but it looks like there out of business? Website just errors out. I am happy to pay for a module.
|
Re: TSW SIP/Rava send DTMF
Awesome, Thanks Eric that worked.
Regards
s
|
APIs for Tripp Lite UPS APIs
Hello, has anyone seen API documentation for Tripp Lite UPS's.? Specifically, I am interested this PDU - PDUMV20NETLX.
Thank you
Bryan
|
Re: Biamp Tesira Modules Suite
thank you.? I completely forgot to check Biamp site.??
|
Re: Biamp Tesira Modules Suite
This can all be found on Biamp's support website.
Module 1.7 deep dive
Links to all versions of Biamp Control Modules
|
Biamp Tesira Modules Suite
anyone have the crestron biamp module suite for a 2 series processor?? I believe the last I recall seeing (its been a while) is version 1.7.? The help file for the version 3.3 references that for a 2 series processor I need use module suite 1.x.
Thanks in advance
|
Re: PAC 2 third party integration
While it will not talk to the PAC2, you could install a small 3/4 Series processor and EISC to the PAC2. Then that RTI widget would talk to the newly installed 3/4 Series processor. He would also need the source code running on the PAC2 to be able to make this kludgy solution work.?
toggle quoted message
Show quoted text
On Wed, Aug 2, 2023 at 05:22 PM, BruteForceIsUnderRated wrote:
That solution is for 3 & 4 series. The PAC2 will not work with that.
|
Re: TSW SIP/Rava send DTMF
It's most likely an in-band/out-of-band issue.
You can send SIPAUDIOMODE to see what mode it is in.
SIPAUDIOMODE RFC2833 ON and SIPRESTART will set it to out-of-band.
SIPAUDIOMODE RFC2833 OFF and SIPRESTART Will set it to in-band mode.
|
I'm trying to send the key press 0# to an old SIP intercom system to open a gate.
This works from the SIP phones but not from the touchpanels.
Is this supported on TSW's?
|
Re: Send myself a text when....
I know At&t supports e-mail to text.? All I had to do to confirm that is send a e-mail to (my phone number minus the 1 and no dashes)@txt.att.net? Within 5 seconds the e-mail showed up as a text on my phone.? The logic should be no problem.? Just have to figure out how to use that send e-mail module in the C data base.? It does say it works with 2 series.? I don't think I need any other service to make it work.
|
Re: PAC 2 third party integration
It is definitely possible, especially if you just want to do simple things like trigger room presets (or toggle a few loads).
If you would want to get into full lighting interface with direct load control (0-100%, etc) that would not be easy or worth the effort.
Also, Do you have access to the current source code? without it, it would require a complete re-write of the code to even change a preset. Its unlikely that the source is stored on the processor.
Getting the Source code from the original client/family or dealer would be my first order of business.
Please reach out to me if you'd like to review options or to see if I can help you...
chris at eicustom dot com
|
Re: PAC 2 third party integration
So, you are going to upgrade from Crestron to RTI? ? Awesome. ?The programming to hack that up reliably could run into more money than the difference between Crestron and RTI.? Really wish you good luck with that. ? BTW the PAC2 is a processor . . . ? Hello all,?
We have a takeover job where the owner went to prison for laundering and this new customer is doing a complete makeover except for the lighting panels and so forth. We are getting new crestron keypads though.
My question is that were are going to be using an RTI control system, and they have an existing working PAC2. Is there any way we can control the PAC2 with rs-232 and how would be go about doing that? Were barley getting familiar with Crestron products.
If it is not possible would another solution be to add a crestron processor to be the middleman for communication?
|
Re: OT: Verizon Wireless Service
I am about 7 miles from the nearest tower.? -117 to -123 signal was unusable except outdoors in direct line of sight. ??I installed a Wilson WeBoost amplifier system and I now enjoy -80 ish 4G.? Not sure about 5G, but the cell service is pretty stable.? I have had to reboot my phone to connect ?a few times over the last couple months but I think it is a droid thing . . . (Android Updates – Thank you Sir, may I please have another .? .? ) ? On Wed, Aug 2, 2023 at 09:52 AM, Steve Kuehn wrote: In those cases, I have to turn on airplane mode and then re-enable WiFi
Yes, I have to do that sometimes as well...never needed to do that before...
|
Re: PAC 2 third party integration
That solution is for 3 & 4 series. The PAC2 will not work with that.
NFH ?Hello all,?
We have a takeover job where the owner went to prison for laundering and this new customer is doing a complete makeover except for the lighting panels and so forth. We are getting new crestron keypads though.
My question is that were are going to be using an RTI control system, and they have an existing working PAC2. Is there any way we can control the PAC2 with rs-232 and how would be go about doing that? Were barley getting familiar with Crestron products.
If it is not possible would another solution be to add a crestron processor to be the middleman for communication?
|
Re: OT: Verizon Wireless Service
On Wed, Aug 2, 2023 at 09:52 AM, Steve Kuehn wrote:
In those cases, I have to turn on airplane mode and then re-enable WiFi
Yes, I have to do that sometimes as well...never needed to do that before...
|
Re: PAC 2 third party integration
toggle quoted message
Show quoted text
On 2 Aug 2023, at 12:01, Corbin Lovering <Corbin.Lovering@...> wrote:
?Hello all,?
We have a takeover job where the owner went to prison for laundering and this new customer is doing a complete makeover except for the lighting panels and so forth. We are getting new crestron keypads though.
My question is that were are going to be using an RTI control system, and they have an existing working PAC2. Is there any way we can control the PAC2 with rs-232 and how would be go about doing that? Were barley getting familiar with Crestron products.
If it is not possible would another solution be to add a crestron processor to be the middleman for communication?
|
PAC 2 third party integration
Hello all,?
We have a takeover job where the owner went to prison for laundering and this new customer is doing a complete makeover except for the lighting panels and so forth. We are getting new crestron keypads though.
My question is that were are going to be using an RTI control system, and they have an existing working PAC2. Is there any way we can control the PAC2 with rs-232 and how would be go about doing that? Were barley getting familiar with Crestron products.
If it is not possible would another solution be to add a crestron processor to be the middleman for communication?
|
BruteForceIsUnderRated
nicofreda