开云体育

thank you.? I completely forgot to check Biamp site.

This can all be found on Biamp's support website. Module 1.7 deep dive https://support.biamp.com/Tesira/Control/Crestron_Tesira_Module_v1.7_-_deep_dive Links to all versions of Biamp Control Modules

anyone have the crestron biamp module suite for a 2 series processor?? I believe the last I recall seeing (its been a while) is version 1.7.? The help file for the version 3.3 references that for a

While it will not talk to the PAC2, you could install a small 3/4 Series processor and EISC to the PAC2. Then that RTI widget would talk to the newly installed 3/4 Series processor. He would also need

It's most likely an in-band/out-of-band issue. You can send SIPAUDIOMODE to see what mode it is in. SIPAUDIOMODE RFC2833 ON and SIPRESTART will set it to out-of-band. SIPAUDIOMODE RFC2833 OFF and

I'm trying to send the key press 0# to an old SIP intercom system to open a gate. This works from the SIP phones but not from the touchpanels. Is this supported on TSW's?

I know At&t supports e-mail to text.? All I had to do to confirm that is send a e-mail to (my phone number minus the 1 and no dashes)@txt.att.net? Within 5 seconds the e-mail showed up as a text on

It is definitely possible, especially if you just want to do simple things like trigger room presets (or toggle a few loads). If you would want to get into full lighting interface with direct load

So, you are going to upgrade from Crestron to RTI? Awesome. ?The programming to hack that up reliably could run into more money than the difference between Crestron and RTI.? Really wish you good

I am about 7 miles from the nearest tower.? -117 to -123 signal was unusable except outdoors in direct line of sight. ??I installed a Wilson WeBoost amplifier system and I now enjoy -80 ish 4G.?

That solution is for 3 & 4 series. The PAC2 will not work with that.

Yes, I have to do that sometimes as well...never needed to do that before...

https://janustechnology.co.uk/products/drivers/control-system/rti/rti-crestron-remote-interface-up-to-15-interface/ NFH

Hello all, We have a takeover job where the owner went to prison for laundering and this new customer is doing a complete makeover except for the lighting panels and so forth. We are getting new

We are in a remote rural mountain area and I installed a Samsung VZ femtocell many years ago. All phones show 5 bars. It is hooked into our Internet which is a radio tower about 13 miles away.

My latest article, "Integrating Natural Disaster Detection Sensors into a Smart Home” is being published by the good folks at Residential Tech Today Magazine on their web site. Severe weather,

I might add that even though I have good WiFi signal and a crappy cell signal and I have my phone set to prefer WiFi calling, it will try to use the crappy cell signal instead of WiFi --? Both for

I have had that issue happen to me several times.? Cell companies are constantly upgrading their networks with new technologies and removing old equipment.? First it was when they discontinued 3G,

I believe I followed all the instructions, including changing the include path in the SIMPL+ module, but I will go through them again to see if I missed something. Thank you!

Hi All, I've been a Verizon Wireless user for 20-25 years in New England and always loved its Great coverage and reliability. For the last 4-6 months things seem to have gone south, even sometimes