开云体育

When you placed the iPhone files in the HTML folder, make sure that you you are transfering two separate files, not the one folder.

I'm trying Lincoln's solution mentioned above, since I'm not having the luck that others apparently have with the Global Cache devices.? ?However, despite being set up how I feel is properly (same

Hello, have any of you ever used the BACNETRegasfd (register as foreign device) command from the processor console? I want to communicate with a bacnet controller that is on a different VLAN (I can

If you are looking for the buttons to show feedback then that is not a feature. If you are just looking for button presses then, I just tested this on a TS-1070 using latest firmware without an

How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not

How do you force the dimming phase on a Clwi dimuex? ?Auto is causing flashing and I can see how to get reporting but not change the phase from auto to reverse to forward to see if a fixed setting

What Justyn Said. Also, in the Go app on your phone, make sure that you 'Enable SSL' and add the UN/PW of the processor (main or user account if set up)... Other than that it may be an issue with your

also type "ENABLEFEATURE" in text console. ?You may want to disable some of those services as well. Michael

Hi Thorsten In the Crestron Go settings there is an option to allow access to the local network. This can randomly be turned off by default, but not in all cases weirdly. Good luck. Justyn

Thorsten, if you’re able to send me the SIMPL and VTPro files I’ll load onto my test area and take a look for you. ?We have many CP3 processors and iPad Go apps connecting. steve

Are there firewall rules blocking traffic? Verstuurd vanaf mijn iPhone

Hi, i need to get a project up and running using the Crestron Go app. Some help on the basic steps are much appreciated. What I did so far: 1) Loaded the Go app onto an iPhone (IOS 16) 2) Created a

Hi all, I'm trying to reverse-proxy my personnal VirtualControl Server with nginx without success. Has someone managed to make it run? Regards,

It doesn’t, easiest way is via Crestron Go on an iPad.

Has anyone set up a VC-4-PC-3 with on-prem Fusion? Can't find much documentation on it and waiting for an email from Fusion Support Group. Thanks!

As others have said, that message is related to XiO Cloud functionality. I don't recall offhand if newer 3-Ser FW suppressed that particular message or not, but you should either: 1) Disable XiO

Sending formatted text to a SRL indirect text object should work ok. I've used it before, in the format: *<P><FONT size="16" face="Arial Unicode MS" color="#000000">Some Label</FONT></P>*

I'm using a bunch of SRLs, both horizontal and vertical in my VTPro projects, and I have run into weirdness occasionally where if one object is sent some text which overflows its intended boundaries,

I should add the only thing on the subpage is an advanced button.We are working around the issue by deleting the button text and adding a simple label, which displays correctly, A formatted text

I'm using a bunch of vertical SRL in my current project and haven't seen that behaviour.? I'm running whatever the latest is available through master installer. Do you happen to have both the