Evertz NUC=AV-100 session manager
Just got some projects with this. Has anyone controlled the Session Manager before/?
I have a call into Evertz to get API into, just checking here with the group to see if anyone has experience with this.
Thanks
|
Re: Console command(s) for changing a CRESNET device's Serial Number/TSID
#cp4r
I'm connected to just one dimmer module through my CP4-Rs CRESNET port.
And nothing, manually changing its CRESNET ID sadly doesn't do anything, it changes to the one I want, and then when I hit RESCAN on the CP4-R to find the updated dimmer module, its ID changes back to the one its assigning to all of my GLXX-2DIM8s.
The weird thing is that the SN being reported by TOOLBOX, is 1 digit longer than the one Crestron uses (and it doesn't match at all), and its TSID is currently "DEADBABE"....
|
Poly "Partner Mode" - external control?
I'm going to have a G7500 that will be set up as a Zoom Room in "Partner Mode".? Is there *any* control (presumably through the RESTful API) of the device when it is functioning in Zoom Room mode?? I've run through the Poly website, but their documentation is pretty abysmal regarding what works in "Partner Mode" vs "Video Mode".
|
Re: Console command(s) for changing a CRESNET device's Serial Number/TSID
#cp4r
I would try one device at a time.? Disconnect all of the devices but one. Then try assigning cresnet id's with toolbox.
On Tue, Feb 14, 2023, 9:51 AM David Chramcow < dchramcow@...> wrote: Currently having lots of issues making a CP4-R assign valid cresnet IDs to several GLXX-2DIM8 units. The CP4-R is currently reading all the GLXX-2DIM8 units as the same. Crestron rep told me that he's 99% sure that this issue is being created by invalid CRESNET TSIDs on these particular devices.
Currently, Toolbox is not bringing up the function to change this device serial number/TSID, so, my question is, can this be done via console command(s)?
|
Re: BSS BLU Matrix Router
Does anyone know if the router control will take an InputValue of 0d to force an unroute if the Route input is held high?
Or do you need to feed it the same InputValue as the ActualRoute value and then pulse Deroute? On Mon, Feb 13, 2023 at 2:10 PM BruteForceIsUnderRated via <crestronpro= [email protected]> wrote:
[Edited Message Follows]
I see that it is in the State Control module and not in the Router module,
|
Console command(s) for changing a CRESNET device's Serial Number/TSID
#cp4r
Currently having lots of issues making a CP4-R assign valid cresnet IDs to several GLXX-2DIM8 units. The CP4-R is currently reading all the GLXX-2DIM8 units as the same. Crestron rep told me that he's 99% sure that this issue is being created by invalid CRESNET TSIDs on these particular devices.
Currently, Toolbox is not bringing up the function to change this device serial number/TSID, so, my question is, can this be done via console command(s)?
|
Re: HTML5/CH5 WYSIWYG Editor for the Crestron control system
#html5
#ch5
I like it. Very nice. Only been playing for a couple minutes but very impressive.?
toggle quoted message
Show quoted text
On Dec 2, 2022, at 9:48 AM, johnh via groups.io <johnh@...> wrote:
?I signed up but when I try to use their editor webpage it just grinds Chrome to a halt. Also tried again today as I saw an update email and I can't even create a new project.?
|
Re: Firmware update issues with 3-series
On Mon, Feb 13, 2023 at 09:37 PM, Ady Agung Syahputra wrote:
Yes, the issue I experienced was that AV3 did not get the router configuration properly
Don't even get me started about the internal router!...:) I understand that there are applications for it, but I stopped spec'ing AVx and PROx (and CPxN) processors a while ago because of 'enhanced' issues that they brought...
|
Re: Cisco Touch 10 Layout
Oh, that's gold thanks!
Don't know why this never popped-up on a google search.
|
Re: Firmware update issues with 3-series
Oh I thought you had tried Betacleanup already. I have had that fix an issue for me on a CP3 where the webserver would never run, and an Init and/or Restore wouldnt fix that. Well at least and at last you finally got it up and running!
|
Re: Firmware update issues with 3-series
Yes, the issue I experienced was that AV3 did not get the router configuration properly and also the problem with the discover symbol on fusion
i tried to do this step, and it worked and now everything goes smoothly
On Tue, Feb 14, 2023 at 9:11 AM ckangis < chris@...> wrote: Well this process finally did it!!? thanks for the suggestion, Ady!? ?FTR, TB support guy I was working with who was seeing the same issue on his CP3 said he tried BETACLEANUP in addition to other stuff but didn't work for him, so it could just be the specific process, or maybe just 'luck'...
Would love to know if things work for others, too...
INITIALIZE
RESTORE
BETACLEANUP
Filezilla the Puf File
PUF ALL
-- Best Regards,Ady Agung Syahputra PT Technet Vision Indonesia System Engineer 08118692425
|
Re: Firmware update issues with 3-series
Well this process finally did it!!? thanks for the suggestion, Ady!? ?FTR, TB support guy I was working with who was seeing the same issue on his CP3 said he tried BETACLEANUP in addition to other stuff but didn't work for him, so it could just be the specific process, or maybe just 'luck'...
Would love to know if things work for others, too...
INITIALIZE
RESTORE
BETACLEANUP
Filezilla the Puf File
PUF ALL
|
Re: Firmware update issues with 3-series
Hi,
Try this 3 commands to get a comprehensive back to fresh out-of-the-box state. INITIALIZE to clear loaded files (programs, web pages, app project files, etc.). RESTORE to return settings to factory defaults. BETACLEANUP to restore the protected sector of memory to defaults.
Pada tanggal Sel, 14 Feb 2023 08.08, ckangis < chris@...> menulis:
Tried INITIALIZE, Puf All...nope.
RESTORE, Puf All...Nope...
|
Re: Firmware update issues with 3-series
Tried INITIALIZE, Puf All...nope.
RESTORE, Puf All...Nope...
|
Re: HTML5/CH5 WYSIWYG Editor for the Crestron control system
#html5
#ch5
Thank you for your comment. We are listening to you and looking forward for any feedback.?
Here you go -?
This is a video how to create a GUI in AVstudio.?
|
For those who have SMW integration with AprilAire 8810-8840 wifi Tstats, has anyone seen communications issues with them lately?? Particularly with 4-series running recent FW??
TIA!
|
Ah! Ok, thanks for clarifying Dave!!
|
Re: BSS BLU Matrix Router
I see that it is in the State Control module and not in the Router module,
|
On Mon, Feb 13, 2023 at 03:06 PM, ckangis wrote:
Can you or can you not create manual channel line files in V2??
I haven't used either yet, but was under the impression that V2 allowed you to do this
You misunderstood.
TVPv1 REQUIRES manual creation of channel lineup files.
TVPv2 downloads channel lineups from the internet following search for ZIP code & selection of provider.
In instances where a provider isn't available from the data provider (Tivo/Rovi), TVPv2 lineups can be manually created (in VTProE systems; not supported in CH).
?
|
Re: Firmware update issues with 3-series
I would initialize the processor and then try again after a failed attempt.
|
BruteForceIsUnderRated
Dave H - Crestron True Blue Tech Support Engineer Since 2014