开云体育

Good day all. Hope someone can assist me. I have not been programming for a while as I used my "alone time" during Covid to do all the upgrades to my system that I needed. I need to add a few lines to

A router only allows a single input routed to an output at a time. It seems you’re looking for some version of a mixer. Matrix maybe?

I am using the BSS BLU modules v1.4 I have a Matrix Router to control. This matrix router has two inputs to a single output. I have the Control Type as SourceMatrix. The [A] parameter is set to 1 as

In these cases, there is still Crestron doing the control of the devices, just the Touch10 is the UI for the Crestron.? There is no direct control of other devices from the Cisco. Look up "Cisco Room

A "day of week" Simpl+ module is about the easiest you could do.

Greetings! I used a TOD to turn on/off a boardroom monitor, but forgot about Sat/Sun. How can I turn on the monitor only M-F? Thanks in advance.

Thanks Darren the commands for disabling infinet can be found in the zip file uploaded by Anthony. While the command to use to add the ip table entry is addmaster ip id and ip address of processor are

Thanks Anthony. This really came through. Even though the tst wifi cannot be added into an rmc4 ethernet devices slot, I had to? use an rmc3 processor in simpl windows so that I can be able to add

I’ve got one Gateway if you want and TST902 to sell

Got it! I was erroneously thinking that the port # on the toolbox address entry was the 49300 port... but now I know that it was supposed to be the HTTPS port instead. The "Port(if not default)" does

Dear Crestron Team, Like many of us in the Crestron World, I have numerous used but functioning equipment such as: * Pro 2, MC2e Processors * Multi-Channel 16 X 60 & 12 X 60 Amps * Surround Sound

Crestron dealer here.? I'm looking for 5 CLX-2DIMU8 modules.? If anyone has any of them they're willing to part with, I would greatly appreciate it.? I realize this is probably a fruitless effort,

Ressurecting an old thread, sorry. Yes, I understand the advantages of controlling a Crestron system via the Cisco touch 10 but how? Where is the documentation for that, adding buttons, setting up

I've added the .tio files and instructions on how to do this in a zip file here.? Just search for tst-902 or try this link:

Hear how it works. There are files supplied by Crestron that is loaded to the programmers pc that installs a WiFi definition for the TST-902.

I would also like to know the answer to this. I've only ever installed a few of these. Seems like you have to have a gateway for control, but it has built-in Wi-Fi that can't be used for control.

I just mocked this up with no issue.? You probably can't forward 443, nor should you.? Pick a random port and setup your router to forward that to 443.? Also forward 49300, as you have already.?

Yes. You can run it over WiFi. Call TB and they will help you. Files were circulating either here, or in the facebook group.

Hi guys, I have project where the touch screen is the wireless tst902 and the processor is an RMC4.Am aware that we have to have a crestron ER gateway so as to use the touch screen with this

Maybe mentioned before, but what about a recompile/upload after upgrade.