开云体育

Hi Leonardo, I am currently struggling with communication between Crestron and Lutron QSX also so thought I'd reply. As far as I understand, you enter the command processor id appropriately (Probably

You could always look for an older 3 series processor as well

I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range

Hi Guys any one can help me how to control Lutronx QSX i used the module from application market and set all the parameters needed like username/password IP address of the lutron processor and follow

Great. Thanks for the help I will try these options

I see you got PJ Link working so probably don't need to spend more time on it. But in case other people come across this thread were you using the oh so helpfully named "Crestron Connected Display"

I did an interface that could be changed between German French Spanish and English. A button on the tech page would switch between the languages. I took my English text and translated with Google

For these cases, I have clients who want 3 - 4 languages in their panels, I use indirect texts, with custom modules with JSON or XML. You can also use multiple serial send or similar When select the

Thanks Phil and Chris. I think I may have bit off a bit more than I can chew and would appreciate a bit more help if you're feeling so generous. On my test bench I've got VC4, a TSW-770, and my MTA

Client is requesting to include a Japanese translation of the text on a TS-1070 touch panel. My first thought was to use an English to Japanese translator, copy that into a Word Doc then use Gimp to

My Flirc files are in the files section if you want to give it a try.

Good to hear __________________________ Mike Oberholzer - CTS Systems Software Engineer 518-650-7955 AUDIO-VIDEO CORPORATION 213 Broadway Albany, NY 12204 518-449-7213 518-449-1205 Fax

I've used the Inteset on a couple of jobs and it seems to work well. Being able to use an existing IR driver was also a plus :-) There have also been issues with the Fire TV going to sleep, which are

Yep.? I used 0A in program and set the PJ to 10.? IPID is online and I still don't get Crestron Connected control.? I found the issue with my PJ Link.? Was using the wrong port.? The PJ Link

Just remember the IPID on the projector may not be HEX, so if in your program it is 10, the projector would be set at 16 for connected device setup __________________________ Mike Oberholzer - CTS

Is there a module for PJ Link control or can someone post a properly formatted command?? I've tried the crestron connected and the projectors IPIDs are showing online, but not controlling them.? So

are you familiar with C#? If so SIMPL# is a lot easier to do this.

Thanks, I thought I remembered the updates killed it for pyng, just verifying so thanks.

I've used the Inteset with XBox 360 IR code set out of the Crestron DB and it works good. You need a USB y adapter in-line with the power supply though (in the amazon description).

Copied from another post... " Slip Cougan ( /g/crestron/profile/@slip_cougan ) Jan 9 #248724 ( /g/crestron/message/248724 ) Had to laugh, someone on r.crestron says