开云体育

Lemme see what we did to get it working. ?I know we have several of them out in the wild. ?The protocol I believe is available on the website also.

I used an SIO to send commands last time I had to deal with Shure MTX - the protocol is on their website if I recall correctly. -- Cheers Phil

Considering the last firmware release for the Pyng-Hub was Aug 2019 and it wasn't until Oct 2020 that Crestron came out with a patch for the CP3 to fix the Sonos issue, it is unlike that the Pyng Hub

The module for the Episodes is a complete mess FWIW.? For some reason they have input toggles, no idea why.? There are multiple other issues as well.

I've never done anything with Pyng except lighting, but there was a change (~3-4 years ago) to the *Simpl* Sonos modules that accommodated some comm's changes (probably S2, I can't remember now....)

AV Master, I just started playing with the Snap module and 'What the Bleep'??? Did you write your own? I've never seen a more flaky module design and operation?? **? The ability to select multiple

I ran into an old job yesterday with an original Pyng hub and a mix of current Sonos Amps and older Connects.? The pyng system couldn't find the Sonos gear and was throwing error messages about

Hi, Could you find any IP module for it?

Thorsten, I have integrated hue bulbs in my home using a Hubitat Elevation hub and the Crestron-Hubitat software on my GitHub.? It is rock solid with the exception that you don't want to overload the

It has been working good for me on a MC4 for a few years.? I have taken the code into S# Pro and am not refreshing however. public void HueStartup() { //HUE Lighting _hue = new HueProc();

Hi, hm, that?s interesting. Just had a constellation where it finds all the rooms and bulbs after restart and seems to be stable (running the demo program coming with the modules on a RMC3). However,

Hi - I'm working on one of my first SIMPL programs after having worked with Extron for years. I'm trying to add a Shure MTX Mute button to a SIMPL program without having any other MTX devices and

I tried it recently also and it consistently locked up my Rmc4 requiring a power cycle.? Gave up on it in the end.

Hi, i?m just giving the Philips Hue modules developed by Monte Thyden a try and i?m experiencing issues with it. Init procedure works fine, IP and key is fetched and stored. However, it?s not able

Thanks Thorsten. I'm just glad that people find the software and the articles I write useful. Jay

Jay, thank you very much for the heads-up. I?m using your module suite for quite some time and just realized that I was on a very old version which didn?t provide any handling of the Shelly

I haven't done a 3-way but it wouldn't be too hard.? If your switch locations aren't wired like a typical 3-way but there is power at each switch location then you could put a Shelly relay at each

Shelly has some interesting products at affordable prices. Has anyone here converted a 3-way switch to a Shelly interface? What about dimming in that same scenario? I didn't see anything that looked

I've found the Shelly products to be very reliable Have fun with the driver software Jay

Fun fact: I have a client's house running temporarily on Shelly modules (Pro 4PM) until Crestron can deliver CLX modules. They are rock solid. Thanks to Jay for turning me onto them. OP