开云体育

Hello Cates, Sorry to disturb you, yes I got it in the file section thank you so much.

Hello Cates, Sorry, but I can't find in the files section, can you please share the link for the same.

What version(s) of qsc software had this issue I assume this is now fixed in 9.3.1?

I ran into a similar problem with the QSC logs showing the processor connecting and disconnecting over and over again. We involved QSC tech support and they created a beta version of firmware to fix

I created a module which uses the astronomical clock symbol and provides additional controls for turning the lights on/off at specified times (to prevent lights from staying on all night).? I posted

Uploaded to the files section.

i was writing to a Crestron ATP card & still got the too small message

At the Crestron NEXT roadshow events, they showcased a new product line of 'tunable' lighting that you're looking for... It is *supposed* to be delivered 1st Q, but will see... They are making the

It's in the Crestron database, everybody has it, if you have the Crestron suite of software, then you have it.

I might add that it could be that Crestron has run out of high endurance flash cards too.? If that is the case, well than you will have to settle for consumer grade flash cards. Also, I used the FREE

The astronomical clock is a symbol in your Crestron Database.

Hi, I have a similar problem with a CP4N not staying connected to a QSC 510 Core. The QSC Core firmware is 9.1.2 and the CP4N firmware is 2.6000.00026 The errors I get is this: Error: SimplPlus[App01]

yes, i realize the generic cards i ordered are not equivalent to the high endurance ATP cards but, more an experiment to see if i could get them working again

Dear All, Can anyone share Crestron Astronomical Clock Lighting Control Modules.

Please share again Astronomical Lighting Control Module. > >

For a MC3 not using USB-Ethernet devicenum is always 0 Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Friday, February 4, 2022 2:35:47 PM To: [email protected]

I think your best option is to send it to Crestron and have them replace the memory.? The reason I say that is because: 2GB high endurance SD cards (non-SDHC) are hard to come by.? At least my MC3

I use the heck out of copy/paste special. Ctrl+C, Ctrl+Sft+V.

have MC3 up, but fixed IP on another subnet trying to use DHCP command from text console, but can't figure out what device_num is?? i.e. DHCP device_num ON

i had to move to my laptop and use the SD slot trying to use the SD slot on my monitor via USB3 got me the i/o error every time